Electrovision Scart Chassis Socket - Right Angled

It means the pins are bent at a 90-degree angle relative to the mounting plane, allowing cables to exit sideways rather than straight out.

Yes, as it is a 21-way Scart socket, it supports the full range of audio and video signals defined by the Scart standard.

Chassis mount means it can be fixed to the exterior of a case or panel, usually with screws or clips. PCB mount means it is designed to be soldered directly onto a printed circuit board.

You will need a soldering iron, solder, and potentially tools for cutting a chassis mounting hole (like a drill or file).

This is a standard quality Scart socket. While it will pass signals, for optimal high-definition performance with analog signals, ensure your entire signal chain is of appropriate quality. Digital signals are typically handled by HDMI.

The product dimensions are approximately 1.70cm (Depth) x 6.50cm (Width) x 2.50cm (Height).

Verify all 21 pins are correctly soldered and making good contact. Check the integrity of the connected SCART cable and the source/display devices.

Inspect solder joints for cold joints or breaks. Ensure the socket is securely mounted and not under mechanical stress.

Re-secure the mounting mechanism (screws for chassis mount, or ensure proper PCB soldering). For chassis mount, ensure the cut-out size is appropriate for a snug fit.