Trend Kitchen Worktop Jig - 650mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Trend Kitchen Worktop Jig - 650mm is designed for professional carpenters and DIY enthusiasts looking to achieve precise and consistent worktop joints quickly. Its key benefit is the ability to cut both parts of a joint in approximately 15 minutes, significantly speeding up installation. A potential limitation is its specific compatibility with worktop thicknesses up to 40mm.
All features
| Model Part Number | KWJ/PRO |
|---|---|
| Brand | Trend |
Extended Product Information
FAQs
What is the maximum worktop thickness this jig can handle?
The Trend Kitchen Worktop Jig can accommodate worktops up to 40mm thick.
Does the jig work with rounded or postformed edges?
Yes, it can cut worktops with or without an anti-drip postformed edge.
What type of router is required?
You will need a router with a 30mm or 32mm collet (depending on the router model) and appropriate straight cutters.
How long does it typically take to cut a joint?
The jig is designed to cut both parts of a joint in approximately 15 minutes, including setup.
Can this jig cut joints for peninsula worktops?
Yes, it is capable of cutting a 400mm radius peninsular joint.
What worktop widths are supported?
It has fixed lengths for 600mm, 616mm, 635mm, and 650mm wide worktops.
Can it cut door hinge holes?
Yes, it can cut 35mm kitchen door holes.
Troubleshooting
Jig not seating correctly
Ensure the worktop surface is flat and free from debris. Check that the plastic pins are clean and undamaged.
Inconsistent joint cuts
Verify that the jig is securely clamped to the worktop and has not shifted. Double-check router depth settings and ensure the router base is firmly against the jig's guides.
Worktop thickness not accommodated
Confirm the worktop thickness does not exceed the 40mm maximum. Ensure the router depth is set correctly for the material.
Plastic pins breaking
Inspect pins for damage before use. Replace any worn or broken pins to ensure proper alignment and prevent stress on the jig.
Pros and Cons
Pros
- Significantly reduces time required for worktop jointing.
- Provides accurate and repeatable results for professional finishes.
- Versatile enough for various common joint types and door holes.
- Robust build quality ensures durability in demanding workshop environments.
- Accommodates different worktop widths and edge profiles.
Cons
- Primarily designed for specific worktop widths (up to 650mm).
- Requires a router with appropriate collet size and straight cutters.
- Initial setup may require practice for optimal results.
Setup, Compatibility & Care
Setup:
- Ensure the worktop is securely clamped on a stable surface.
- Position the jig onto the worktop, aligning the Ø10mm plastic pins with the marked joint lines.
- Use the fixed length guides for standard widths or adjust as per requirements.
- Securely clamp the jig to the worktop, ensuring it does not move during routing.
- Set your router depth accurately for the worktop thickness and cutter diameter.
Compatibility:
- Suitable for worktops up to 650mm wide and 40mm thick.
- Works with worktops featuring or lacking an anti-drip postformed edge.
- Requires a suitable router with a 30mm or 32mm collet (depending on router model) and appropriate straight cutters.
Care:
- After use, clean the jig with a damp cloth to remove dust and debris.
- Store the jig in a dry place to prevent damage to the laminate material.
- Regularly inspect the plastic pins for wear and replace if damaged to maintain accuracy.