Best current price£6.92from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£6.92Visit shop Gtv (12X 160Mm) Sds+ Masonry Drill Bit For Brick Stone Concrete Reinforced Stone Professional Gr
Visit shop
B&Q£7.25Visit shop B&Q - Sds+ Masonry Drill Bit For Brick Stone Concrete Reinforced Stone Professional 12X 160mm
Visit shop3 offers from £6.92 - £7.25
View price history by clicking the chart icon.
This GTV SDS+ Masonry Drill Bit (12x 160mm) is for professional tradespeople and serious DIYers needing to drill into tough materials like concrete and stone. Its key benefit is fast, efficient drilling, but a potential caveat is its specific compatibility with SDS-plus chuck systems only.
| Model Part Number | (12x 160mm) SDS+ Masonry Drill Bit |
|---|---|
| Brand | GTV |
This SDS+ Masonry Drill Bit is designed for drilling into brick, stone, concrete, and reinforced concrete.
You need a rotary hammer drill with an SDS-plus chuck system to use this bit effectively and safely.
No, this bit is specifically designed for SDS-plus chucks and will not fit or function correctly in a standard drill chuck.
Insert the SDS-plus shank into the chuck and push it forward until you hear or feel it lock into place. A slight rotation may be needed for it to engage.
Clean the bit after each use, store it in a dry place, and inspect the tip for damage before and after use.
Yes, this bit is engineered to handle reinforced concrete, which includes drilling through rebar.
This refers to the dimensions of the drill bit: 12mm in diameter and 160mm in length.
Ensure you are using an SDS-plus chuck and that the chuck mechanism is clean and functioning correctly. Insert the bit fully until it locks.
Verify the drill is set to the correct hammer/rotary mode. Ensure the bit is sharp and not damaged. Check for blockages in the material being drilled.
Allow the bit to cool down periodically during prolonged use. Ensure adequate lubrication if using a drilling fluid, and avoid excessive pressure.
Check that the bit is correctly seated in the SDS-plus chuck and that the drill is functioning normally. Damaged bits can cause increased vibration.
Setup: Ensure your rotary hammer drill has an SDS-plus chuck. Insert the drill bit shank directly into the chuck until it clicks into place, signifying a secure connection.
Compatibility: This drill bit is exclusively compatible with rotary hammer drills featuring the SDS-plus chuck system. It is not compatible with standard 3-jaw chucks or other SDS systems (e.g., SDS-max).
Care: After use, clean any dust or debris from the bit and its shank using a brush. Store the bit in a dry environment to prevent rust. Avoid excessive heat or moisture. Periodically inspect the carbide tip for any damage.
