Best current price£17.15from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£17.15Visit shop Greenbrook Dat02a Din Rail Mount Chime/Bell Transformer 4/8/12V Ac -1A 5012739626555
Visit shop
B&Q£19.95Visit shop B&Q - Dat02A Din Rail Mount Chime/bell Transformer 4/8/12V Ac -1A
Visit shop4 offers from £17.15 - £19.95
View price history by clicking the chart icon.
The Greenbrook DAT02A is a versatile chime/bell transformer designed for electricians and DIY enthusiasts working with wired doorbell and chime systems. Its key benefit is providing selectable output voltages (4V, 8V, or 12V AC) from a standard 230V AC input, ensuring compatibility with a wide range of existing or new chime units. A minor caveat is its requirement for professional installation within a suitable enclosure due to its nature as a component.
| Model Part Number | DAT02A |
|---|---|
| Brand | Greenbrook |
The Greenbrook DAT02A provides a maximum output current of 1 Amp (1A).
No, this transformer is specifically designed for wired doorbell and chime circuits only.
The output voltage (4V, 8V, or 12V AC) is typically selected via jumpers or terminal block configurations on the unit itself. Refer to the specific product manual for precise instructions.
Yes, as a component intended for electrical installations, it should be housed within a suitable, insulated electrical enclosure for safety and protection.
It supplies AC (Alternating Current) power at selectable voltages of 4V, 8V, or 12V.
While designed for reliable operation, it is intended for intermittent use typical of doorbell systems. Continuous heavy loads may affect its lifespan.
Verify that the 230V AC input is correctly connected and the circuit breaker is on. Check that the output voltage is correctly selected for your chime. Ensure all connections are secure.
Confirm the correct output voltage is selected. Check for loose wire connections at both the transformer and the chime. Ensure the transformer's 1A rating is not exceeded by the chime system's requirements.
Ensure the transformer is securely mounted to the Din rail. Some humming can be normal, but excessive noise may indicate a loose internal component or vibration; consult an electrician if concerned.
Setup: The DAT02A is designed for Din rail mounting within a suitable electrical enclosure. Ensure the power supply is completely disconnected before installation. Connect the 230V AC input terminals to the appropriate power source. Select the desired output voltage (4V, 8V, or 12V AC) by adjusting the internal jumper or terminal connections as per the product manual. Connect the selected AC output to the low-voltage terminals of your chime or bell unit.
Compatibility: This transformer is compatible with all standard wired doorbell buttons and chime units that accept AC power between 4V and 12V. It is *not* compatible with wireless doorbell systems or any device requiring DC power or different voltage/amperage ratings.
Care: Keep the transformer clean and free from dust and moisture. Ensure adequate ventilation within its enclosure. Regularly inspect wiring connections for signs of corrosion or damage. No user-serviceable parts are inside; consult a qualified electrician for any issues.
