Balmoral Premium Range Spear Top Single Gate - Black

A fittings pack is included, but screws for mounting the gate and fittings are not provided and must be sourced separately.

The gate is constructed from solid steel, featuring heavy-duty 40mm x 10mm frames and 16mm diameter infill bars.

Yes, the gate is delivered primed and requires painting with a suitable exterior metal paint after installation to protect it from rust and achieve your desired finish.

The gate is designed to fit a gap of 914 mm wide and has a height of 1168 mm.

Made-to-measure options are limited due to a fixed ring size. Please check specific product details for available customization.

The closing bolt is located on the right-hand side when you are viewing the gate from the road.

The gate itself is black, including the spear heads. It is supplied primed for painting.

Check that the gate posts are plumb and that the gate is level. Adjust the hinges to correct any misalignment. Ensure the closing bolt is aligned with its receiver.

Utilize the adjustable hinges to raise or lower the gate until it is perfectly level. Ensure the gate posts are securely set in the ground and are not leaning.

Clean the affected area thoroughly, remove all rust with a wire brush, and re-prime and repaint the spot immediately to prevent further corrosion.

Lubricate the hinge points with a suitable metal lubricant. Ensure there is no debris obstructing the hinge movement.