Best current price£15.00from Amazon
Shopping.co.uk recommended and popular offers
Amazon£15.00Visit shop Startech Grey/Gold 10M Cat6 Slim Ethernet Cable, 100W Poe++, Lszh, (N6pat10mgrs) | 28Awg Copper, Lszh, -Plated Rj45, Patch Cable, Ethernet Cord, Snagless, Pure Bare, 250Mhz Bandwidth, 10Gbps Speeds
Visit shop3 offers from £15.00 - £16.75
View price history by clicking the chart icon.
This 10-meter StarTech.com Slim Cat6 Ethernet cable is designed for high-density network installations where flexibility and airflow are critical. It offers reliable Gigabit Ethernet and Power over Ethernet (PoE++) connectivity, ideal for crowded server racks and patch panels. A potential consideration is that its slim profile might be less robust for extremely rugged environments compared to thicker cables.
| Series | CAT6 |
|---|---|
| Model Part Number | N6PAT10MGRS |
| Brand | StarTech.com |
The primary advantage is its significantly smaller diameter (3.6mm vs. 5.5-6.5mm for standard Cat6), which allows for better airflow, easier routing in high-density installations, and the ability to fit more cables in the same space.
Yes, this Cat6 cable is rated for Gigabit Ethernet (1000Base-T) speeds and supports frequencies up to 250 MHz, making it suitable for reliable high-speed network connections.
PoE++ (also known as 4PPoE or IEEE 802.3bt Type 4) means this cable can safely and reliably deliver up to 100W of power to compatible devices over the Ethernet connection, in addition to data.
LSZH stands for Low Smoke Zero Halogen. The jacket is designed to emit minimal smoke and no toxic, corrosive halogenated fumes when exposed to extreme heat or fire, making it safer for indoor installations, especially in poorly ventilated areas or where building codes require it.
Yes, the cable features snagless RJ45 connectors. This means the clip on the connector is protected by the boot, preventing it from snagging on other cables or obstructions during installation and reducing the risk of breakage.
The cable uses 28AWG pure bare copper wire. This contributes to better conductivity and lower resistance compared to copper-clad aluminum (CCA) wires.
Yes, the cable is Fluke Tested to comply with ANSI/TIA 568 C.2 standards, ensuring it meets Cat6 performance specifications with minimal Near-End Crosstalk (NEXT) and Return Loss (RL).
Ensure both ends of the cable are securely plugged into the correct ports. Test the cable with a different network device or port. Verify the network hardware and settings are functioning correctly.
Check if the cable is damaged (frayed, cut, kinked). Ensure the cable is fully seated in the ports. Confirm that the connected devices support Gigabit Ethernet speeds. Try a shorter, known-good cable to rule out the cable as the bottleneck.
Verify that both the cable and the connected network equipment (switch or injector) support PoE++ (802.3bt Type 4) and the required power budget (up to 100W). Ensure the device itself is PoE++ compatible.
While slimmer than standard cables, ensure the intended pathway can accommodate the 3.6mm outer diameter. Avoid forcing the cable through extremely tight, sharp bends.
Setup: Simply plug one RJ45 connector into your network device (e.g., router, switch, computer) and the other into your network source. The snagless connectors are designed to clip securely without hindering installation.
Compatibility: This Cat6 cable supports Fast Ethernet (10/100 Mbps) and Gigabit Ethernet (1000 Mbps) speeds. It is backward compatible with older Ethernet standards. It is also compatible with IEEE 802.3bt Type 4 PoE++ for powering compatible devices requiring up to 100W.
Care:
