Best current price£9.39from Amazon
Shopping.co.uk recommended and popular offers
Amazon£9.39Visit shop Dremel DSM510 Cutting Wheel 3-pack for DSM20 Compact Saw, Circular Saw Blades with 20 mm Cutting Depth for Straight, Plunge and Flush Cuts
Visit shop
eBay£9.39Visit shop Dremel DSM510 Saw-Max Metal Cutting Wheel 3 Pack
Visit shopeBay£19.37Visit shop Dremel DSM20 Multipurpose Carbide Cutting Wheel (DSM500) 2615S500JB
Visit shop33 offers from £9.39 - £36.80
View price history by clicking the chart icon.
The Dremel DSM540 is a diamond abrasive wheel for the Dremel DSM 20 Compact Saw, designed for professionals and DIYers needing to cut hard materials like marble, concrete, brick, porcelain, and ceramic tile. Its key benefit is providing precise cuts in tough surfaces. A caveat to consider is its specialized nature, primarily suited for the DSM 20 saw.
| Model Part Number | DSM540 |
|---|---|
| Brand | Dremel |
The DSM540 is designed for cutting hard materials such as marble, concrete, brick, porcelain, and ceramic tile.
It is specifically designed for use with the Dremel DSM 20 Compact Saw.
No, the DSM540 is only compatible with the Dremel DSM 20 Compact Saw.
No, the DSM540 is a diamond abrasive wheel intended for hard mineral-based materials and is not suitable for cutting wood or soft materials.
Clean debris after use and store in a dry place. Inspect the diamond edge for wear before each use.
Always wear safety glasses and a dust mask. Ensure good ventilation and follow the operating instructions for the Dremel DSM 20 Compact Saw.
Ensure the wheel is securely attached and the correct side is facing the material. Check for excessive wear on the diamond edge. Ensure you are not forcing the saw; let the wheel do the work.
This is normal when cutting hard materials. Ensure adequate ventilation and wear a dust mask and eye protection. Consider using a dust collection system if available.
This can occur if too much force is applied or if the wheel strikes a hard, unexpected object. Ensure smooth, consistent pressure and avoid side loading the wheel.
Setup: The Dremel DSM540 diamond cutting wheel is designed to be mounted onto the Dremel DSM 20 Compact Saw. Always ensure the saw is unplugged before attaching or removing the wheel. Follow the DSM 20 saw's instruction manual for the correct mounting procedure, ensuring the wheel is securely fastened.
Compatibility: This wheel is specifically designed for and compatible with the Dremel DSM 20 Compact Saw. It is not intended for use with other Dremel tools or other brands of saws.
Care: After each use, clean any debris from the wheel and the saw. Store the wheel in a dry place. Inspect the diamond edge for wear before each use; if significant wear is visible, it may be time to replace the wheel. Always wear appropriate safety gear, including eye protection and a dust mask, when operating the saw with this cutting wheel.
