Bosch Bayonet Jigsaw Blade - T101D - Wood - 5 Pack

The T101D blade is suitable for cutting softwood, chipboards, wood core plywood, and fibre boards.

This blade is designed for materials ranging from 10-45 mm in thickness.

If your jigsaw uses a T-Shank blade system, the T101D should be compatible. Check your jigsaw's manual.

Insert the T-Shank of the blade into the jigsaw's blade holder and secure it. Ensure it's locked in place.

After use, clean the blade with a soft cloth. Store it in a dry place to prevent rust and inspect regularly for wear. Replace when dull or damaged.

Chipping can be caused by the cutting speed being too fast, the blade being dull, or the wrong blade type being used for the material. Reducing speed and using a sharper blade often helps.

Replacement blades can be found at most hardware stores or online retailers that sell Bosch products.

Ensure the blade is securely fastened and that the jigsaw base is flush against the material. Check the blade for any bends or damage and replace if necessary.

Reduce the cutting speed, and/or use a finer-toothed blade if available for the specific wood type. Ensure the blade is sharp and not damaged.

Check the cutting speed setting for the material type. Ensure the blade is not being forced through the material. Using a blade lubricant can help to extend blade life.