Vallejo Model Colour Paint - Royal Blue

Yes, but you will need to thin the paint appropriately for airbrushing. Use Vallejo airbrush thinner.

You can thin the paints with water or Vallejo thinner. Start with a small amount of thinner and add more as needed.

It dries quickly, typically within a few minutes to an hour, depending on the thickness of the coat and environmental conditions.

It provides a matte finish.

It is suitable for use on metal, plastic, resin, and other model-making materials.

Clean your brushes with water immediately after use.

The paint is non-toxic and water-based, making it safer than solvent-based paints. However, adult supervision is recommended.

Apply thin, even coats and build up the color as needed, usually two or three coats are sufficient.

Add a few drops of water or Vallejo thinner and mix well. Ensure the paint has not dried out in the bottle.

Ensure the surface is properly primed. Lightly sand the surface if necessary to improve adhesion.

Apply thinner coats of paint, allowing each coat to dry completely. Use a quality brush and try to avoid over-brushing.

Allow the paint to thicken slightly or use fewer thinner drops during the painting process. Apply thinner coats.