Liberon Palette Wood Dye - White
Best current price£16.41from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£16.41Visit shop B&Q - 014349 Palette Wood Dye White 500Ml Libwdpwh500
Visit shopB&Q£16.41Visit shop All Offers
3 offers from £16.41 - £19.49
View price history by clicking the chart icon.
B&QB&Q - 014349 Palette Wood Dye White 500Ml Libwdpwh500
Free delivery in 1–3 days
£16.41
Visit shop
Liberon 014349 Palette Wood Dye White 500Ml 5022640003482Free delivery in 1–3 days£19.49Visit shop →
Product Information
Full details
The Liberon LIBWDPWH500 Palette Wood Dye in White is designed for DIY enthusiasts and woodworkers looking to add a subtle, natural-looking color to interior bare woodwork while preserving the wood grain. Its key benefit is providing quick, uniform results that enhance the natural beauty of timber. A potential caveat is its water-based formulation, which may require careful application to avoid raising the grain excessively.
All features
| Colour | White |
|---|---|
| Model Part Number | LIBWDPWH500 |
| Brand | Liberon |
Extended Product Information
FAQs
Can I use this dye on exterior wood?
No, the Liberon Palette Wood Dye is formulated for interior use only and is not weather-resistant.
How can I achieve a darker color?
Apply multiple thin coats of the dye, allowing adequate drying time (minimum 2 hours) between each coat. Ensure the wood is properly prepared to accept the dye.
Can I mix the white dye with other colors?
Yes, different colors of Liberon Palette Wood Dye can be mixed together to create custom shades. Always test your mixture on a scrap piece of wood first.
What kind of finish should I apply over the dye?
You can apply any Liberon Natural Finish Varnish, such as water-based or solvent-based options, once the dye is completely dry.
Is this dye safe for food contact surfaces?
While EN 71-Part 3 approved for toys, it is not specifically rated for direct food contact surfaces. A suitable food-safe varnish should be applied over the dye if intended for such use.
How much area does one container cover?
Coverage is approximately 2-4 square meters per 250ml, depending on the absorbency of the wood and the application method.
What is the drying time?
The minimum drying time between coats is 2 hours. Ensure the surface is fully dry before applying a top coat of varnish.
Troubleshooting
Uneven or patchy color application
Ensure the wood surface is evenly prepared and free of contaminants. Apply the dye in thin, even coats, working consistently with the grain. Wipe off excess dye promptly and uniformly. Consider a second thin coat if needed.
Wood grain appears raised or fuzzy
This is common with water-based products. Lightly sand the surface with fine-grit sandpaper after the first coat has dried, then wipe clean before applying subsequent coats or the top coat.
Dye does not appear to be coloring the wood effectively
Ensure the wood is bare and unfinished. The wood may be very dense or non-absorbent. Try applying a second or third thin coat, allowing adequate drying time between each.
Difficulty cleaning application tools
Clean tools immediately after use with warm water. If the dye has dried on brushes or applicators, it may be difficult to remove completely.
Pros and Cons
Pros
- Easy water cleanup for tools and spills.
- Highlights the natural wood grain for an authentic look.
- Safe for use on children's toys due to EN 71 approval.
- Can be mixed with other colors for custom finishes.
- Suitable for a variety of interior woodwork projects.
Cons
- Water-based dyes can sometimes raise the grain of the wood.
- Requires careful application for streak-free results.
- May not provide opaque coverage if a solid color is desired.
- Drying time requires patience between coats.
- Limited to interior use only.
Setup, Compatibility & Care
Setup:
- Preparation: Ensure the woodwork is clean, dry, and free from dust, grease, and old finishes. Lightly sand bare wood to open the grain if necessary. For hardwoods, a pre-stain conditioner can help ensure even absorption.
- Application: Stir the dye thoroughly before use. Apply evenly using a clean foam applicator or brush. Work with the grain.
- Excess Removal: For best results and to maintain grain visibility, wipe away any excess dye with a clean cloth before it dries.
- Drying: Allow a minimum of 2 hours for drying. A second coat can be applied for deeper color.
Compatibility:
- Wood Types: Suitable for all interior bare softwoods and hardwoods.
- Top Coats: Can be overcoated with Liberon Natural Finish Varnishes (e.g., water-based or solvent-based). Can also be mixed directly with Liberon Natural Finish Varnishes.
- Existing Finishes: Not recommended for application over existing paint, varnish, or oil finishes. Use only on bare, unfinished wood.
Care:
- Tools: Clean applicators and brushes immediately after use with water.
- Storage: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the container tightly closed.