Farrow & Ball Modern Emulsion Paint 2.5L - Green - 214

Yes, Modern Emulsion is specifically designed for these areas due to its washable, scuff-proof, and mould-resistant qualities.

Clean gently with a soft sponge or cloth using warm water and a little mild soap if needed. Rinse with a clean, damp cloth and allow to dry.

Modern Emulsion is Farrow & Ball's most durable and washable finish, ideal for high-traffic areas. Estate Emulsion has a more traditional, chalky matt finish but is less resistant to washing and marks.

No, Farrow & Ball Modern Emulsion is water-based and low in VOCs, meaning it has very little odour.

Yes, provided the existing surface is sound. Lightly sand any glossy finishes to improve adhesion and ensure the surface is clean and dry. For best results, use a Farrow & Ball primer.

Coverage varies depending on the surface and application, but typically a 2.5L tin of Farrow & Ball paint covers approximately 30-35 square meters (325-375 sq ft) for one coat.

No, Farrow & Ball Modern Emulsion is designed exclusively for interior walls and ceilings.

Modern Emulsion provides a beautiful, durable matt finish with minimal sheen.

Ensure the surface was properly prepared: clean, dry, and free from dust, grease, and loose paint. A suitable primer may not have been used, or the surface may have been too glossy. Sand down and reapply primer and paint.

This can occur if the paint was not stirred sufficiently or if it was applied too thinly or unevenly. Ensure paint is thoroughly mixed. Apply in consistent, even coats, maintaining a wet edge to avoid lap marks. Avoid over-thinning.

While washable, some very stubborn stains might require careful cleaning or repainting. Use a soft cloth and mild soap, and avoid vigorous scrubbing. For persistent marks, a touch-up or re-coat may be necessary.

Ensure you are using the correct tools (high-quality brushes and rollers designed for emulsion paint) and applying the paint with consistent strokes. Maintain a wet edge and avoid overworking the paint.