Best current price£116.59from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£116.59Visit shop Hikoki G18dsl2w4z Angle Grinder 115Mm 18V Bare Unit 5063750611365
Visit shop
B&Q£127.80Visit shop B&Q - G18Dsl2W4Z Angle Grinder 115mm 18V Bare Unit Multi Colour (Bare UnitNo Battery Or Charger)
Visit shop2 offers from £116.59 - £127.80
View price history by clicking the chart icon.
The HiKOKI G18DSL2 is a professional-grade 115mm angle grinder designed for tradespeople and DIY enthusiasts who require a reliable, maneuverable tool for cutting and grinding in tight spaces. Its key benefit is the reinforced high gear ratio, which significantly reduces motor strain and burnout risk during intensive tasks. While it excels in ergonomics and safety, users should note that it is sold as a bare unit, meaning you must already own or purchase compatible 18V HiKOKI batteries and a charger separately to operate it.
| Model Part Number | G18DSL2 |
|---|---|
| Brand | HiKOKI |
No, this model is sold as a bare unit, so battery and charger are sold separately.
This unit is compatible with 115mm diameter discs with a 22mm center arbor.
Yes, its higher gear ratio is designed to handle intensive grinding tasks while protecting the motor from burnout.
The grinder features built-in restart protection to prevent accidental activation after a battery change or power interruption.
Yes, provided you use an appropriate diamond blade rated for 115mm angle grinders and at least 9,000/min speed.
Press and hold the spindle lock button located on the gear head, unscrew the outer flange with a pin wrench, swap the disc, and tighten the flange back securely.
Ensure the battery is fully seated. If it was inserted while the switch was on, toggle the switch to 'off' and then back to 'on' to reset the restart protection.
Check that the grinding or cutting disc is mounted centrally and the flange nut is tightened securely.
Check the battery charge level and ensure the air vents are not clogged with debris, which can cause the motor to overheat and throttle performance.
To set up the G18DSL2, ensure you have a fully charged HiKOKI 18V battery. Slide the battery into the base until it clicks securely. Attach the 115mm disc by pressing the spindle lock button, unscrewing the flange, placing your disc on the 22mm arbor, and tightening the flange firmly.
Compatibility: This tool is compatible with most 115mm standard metal cutting and grinding discs with a 22mm arbor hole. Always verify the disc's RPM rating is at least 9,000/min to ensure safe operation.
Care: Clean the ventilation slots regularly using compressed air to prevent dust buildup. Inspect the gear cover periodically for debris and ensure the switch operates smoothly without obstruction.
