Towel Rack - Black

Setup, Compatibility & Care### SetupThe VidaXL Black Steel Towel Rack requires assembly. Follow these general steps for setup:* Unpack Components: Carefully remove all parts from the packaging and verify against the included parts list (Info needed: Check if parts list is provided). Lay them out on a clean, soft surface to avoid scratches.* Assemble the Frame: Connect the steel components as per the instruction manual. Typically, this involves attaching the horizontal bars to the vertical supports using the provided screws. Ensure all connections are secure but do not overtighten initially.* Final Tightening: Once all parts are loosely assembled, place the rack upright and check for stability. Then, systematically tighten all screws securely until the rack feels firm and stable.* Mounting to Wall: Choose a suitable location in your bathroom, ideally near a shower or bath. Use a level to mark the desired mounting points. Drill pilot holes and insert appropriate wall anchors (Info needed: Check if mounting hardware is included). Secure the towel rack to the wall using the provided screws. Ensure it is firmly attached and can support the weight of wet towels.### CompatibilityThis towel rack is designed for indoor bathroom environments. Its black steel finish makes it compatible with modern, industrial, or minimalist decor styles. It can be easily integrated into both large and compact bathrooms due to its vertical, wall-mounted design.### CareTo ensure your towel rack remains in excellent condition, follow these simple care instructions:* Regular Cleaning: Wipe down the steel frame regularly with a soft, damp cloth. For stubborn marks, use a mild soap solution, then wipe dry immediately to prevent water spots.* Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, or harsh chemical detergents, as these can damage the black finish.* Inspect Connections: Periodically check all screws and connections to ensure they remain tight and secure, especially after initial installation.