Blackmagic Design Mini Converter - HDMI to SDI 6G

The Mini Converter HDMI to SDI 6G supports video resolutions up to 4096 x 2160 pixels (4K DCI) at frame rates up to 30 frames per second.

Yes, the Mini Converter HDMI to SDI 6G requires an external 18V DC power supply, which is included with the product.

Yes, the converter features independent balanced analog audio connections that can be embedded into the SDI output.

The device supports Windows 10, Windows 8.1, and Mac OS X 10.12 Sierra, 10.13 High Sierra, and 10.14 Mojave. Basic operation does not require software.

The converter automatically detects the incoming SD, HD, or Ultra HD video signal format and configures itself to match, simplifying setup and eliminating manual format selection for most common standards.

The typical power consumption for the Mini Converter HDMI to SDI 6G is 4.44 Watts.

Yes, it is compatible with a wide range of SDI standards including SMPTE 259M, 292M, 424M, and others, ensuring broad compatibility with broadcast equipment.

Verify HDMI input is active and outputting a supported signal. Check that the SDI cable is securely connected and functional. Ensure the power adapter is properly connected and the device is powered on. Confirm the output SDI format is compatible with your destination device.

Use high-quality, certified HDMI and SDI cables. Check for physical damage to cables or connectors. Ensure the operating environment is within the specified temperature range. Test with a different HDMI source to rule out source issues.

Confirm that audio is present and correctly configured on the HDMI source. Check the audio embedding settings if applicable. Verify that the audio settings on the SDI destination device are correctly configured for the incoming signal.

Power cycle the converter and the HDMI source. Ensure the HDMI source is outputting a signal format supported by the converter (SD, HD, Ultra HD up to 2160p30). Try a different HDMI cable.