Mirka Rewireable Connector - HP-9R

This connector is specifically designed for Mirka® DEROS, Mirka® DEOS, and Mirka® LEROS sanders. It is compatible with most country-specific versions, but not US 110V cables.

Basic electrical tools such as a wire stripper, screwdriver, and potentially pliers are typically needed. Most importantly, electrical knowledge is required.

The primary advantage is the ability to repair a detached connector instead of replacing the entire cable, saving cost and reducing waste.

No, rewiring requires electrical knowledge and adherence to safety regulations. It is recommended for professionals or those with proven electrical competence.

The connector measures 12x3x8cm and weighs approximately 20 grams.

Yes, it is designed as a practical tool for hoover systems used in conjunction with Mirka sanders.

If you are not comfortable or qualified to perform electrical wiring, it is strongly advised to seek assistance from a qualified electrician to ensure safety and proper function.

Verify that the wiring is correctly connected to the terminals and that all connections are secure. Ensure the cable itself is not damaged internally. Check if the power outlet is functional.

Inspect the wiring connections for looseness or corrosion. Ensure the connector housing is properly latched and secured.

Ensure no wires are pinched or obstructing the housing closure. Trim excess wire insulation if necessary.

Re-evaluate the wiring and connection method. Ensure sufficient strain relief is maintained on the cable entering the connector.