Mini Midi Moto Ignition Switch - PetrolScooter - 29296

Wiring diagrams are typically found in the vehicle's service manual or online. Search for the specific make and model of your vehicle.

You will need basic tools such as wire strippers, crimpers, a screwdriver, and possibly a multimeter.

If you have basic electrical knowledge and are comfortable with wiring, you can install the switch yourself. Otherwise, consult a professional.

Follow the wiring diagram for your vehicle. The switch has four wires; the vehicle's wiring diagram will provide which wires to connect them to.

The barrel diameter is 25.6 mm / 1.01 inches and the barrel length is 43.1 mm / 1.7 inches.

The wiring length is approximately 220 mm / 8.66 inches.

While the switch is durable, it is best to avoid direct exposure to excessive moisture. Ensure it is mounted in a protected area.

Use a multimeter to check for continuity between the terminals in the 'On' position and no continuity in the 'Off' position.

Double-check the wiring connections according to the vehicle's wiring diagram. Ensure all wires are correctly connected and that there are no loose connections.

Tighten the mounting hardware to secure the switch firmly in place.

Verify the switch's functionality by testing it with a multimeter. Check the fuse and replace if necessary. Consider replacing the switch if the switch is faulty.

Replace the wires, ensuring the connections are correctly done.