Simpson Strong-Tie C2KS Wall Starter Kit - Silver

The kit includes 2 x Profiled Channels (each 1118mm long), adjustable anchor ties, coach screws (M6 x 50mm), and masonry plugs.

The kit is BBA approved for up to 8m or 3-storey work.

Yes, the kit is suitable for both internal and external use.

You will need a drill, a level, a measuring tape, and possibly a saw for cutting the channels if needed.

The adjustable anchor ties accommodate variations in brick courses, ensuring a proper connection between the new and existing walls.

The kit accommodates 10mm of vertical movement.

Yes, the kit is designed for use with brick and block widths from 60mm to 250mm.

Check the brick or block dimensions against the kit's specifications. Ensure the ties are correctly inserted into the mortar joints. Adjust the tie positions to align with the brick courses.

Verify that all components are securely fastened. Check the alignment and level of the profiled channels. Ensure that the wall ties are properly embedded in the mortar joints at the recommended intervals.

Ensure the pilot holes are the correct size and depth. Use a suitable power drill and apply steady pressure. If necessary, use a masonry drill bit to create pilot holes for the screws.