Shopping.co.uk

Autotek Spray Paint - Black - 300ml

Autotek Spray Paint - Black - 300ml

Autotek Peugeot Noir Perla Nera Fast Drying Aerosol Spray Paint 300ml. Exact match for Manufacture...

Best current price£11.19from eBay

Best offers

Shopping.co.uk recommended and popular offers

TrustedAmazon
Amazon£13.99Visit shop

Autotek Professional Exact Match Car Spray Paint - Peugeot Noir Perla Nera Pearl Aerosol Spray 300ml

Visit shop

All Offers

5 offers from £11.19 - £13.99

View price history by clicking the chart icon.

eBayAutotek Peugeot Noir Perla Nera Fast Drying Aerosol Spray Paint 300ml
Free delivery in 1–3 days
£11.19
Visit shop
My Motor WorldAutotek Grey Peugeot Noir Perla Nera Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop
AmazonAutotek Professional Exact Match Car Spray Paint - Peugeot Noir Perla Nera Pearl Aerosol Spray 300ml
Free delivery in 1–3 days
£13.99
Visit shop

Product Information

Full details

This guide is for car owners and DIY enthusiasts looking to touch up or repaint specific areas of their Peugeot vehicles. The key benefit is achieving an exact colour match for a professional finish with a fast-drying, durable formula. A caveat to note is the requirement for specific environmental conditions during application. Autotek Spray Paint in Black (300ml) offers a high-quality acrylic-based solution for minor repairs and cosmetic enhancements, featuring a precise colour match for manufacturer codes KTV and M09V, and suitable for various automotive surfaces.

All features

ColourBlack
Container Volume300ml
Model Part NumberMC296300
BrandAutotek

Extended Product Information

FAQs

What specific Peugeot models is this paint compatible with?

This paint is compatible with Peugeot 206, 207, 208, 308, 407, 408, 508, 2008, 3008, 4007, 5008, Partner & RCZ models from 2007 onwards.

What is the exact colour code this spray paint matches?

This paint is an exact match for Manufacturer Paint Code: KTV, M09V.

Can I use this paint on plastic parts?

Yes, this paint is suitable for use on rigid plastic surfaces, as well as metal and glass fibre.

How long does it take for the paint to dry?

The paint should be touch dry in 10-20 minutes. It needs to fully cure for approximately 24 hours.

What conditions are best for applying this spray paint?

It is best applied outdoors or in a well-ventilated area at temperatures between 15°C and 25°C.

Do I need to use a primer?

While not strictly mandatory for all applications, applying a minimum of two coats of Autotek Grey Primer is recommended for optimum adhesion and the best possible finish.

Can this be used over existing paintwork?

Yes, it is compatible with nearly all automotive paint finishes, including cellulose.

Troubleshooting

Uneven spray pattern or sputtering

Ensure the aerosol is shaken thoroughly for at least 2 minutes. Clean the nozzle by spraying upside down after use. If the nozzle is blocked, try replacing it if possible or use a new can.

Paint is running or dripping

You may be applying the paint too thickly or holding the can too close. Apply in multiple thin coats, allowing adequate drying time between each. Ensure the surface is not treated in a draft or overly humid conditions.

Poor colour match

Verify the manufacturer's paint code on your vehicle matches KTV or M09V. Ensure the surface was properly prepared and primed. Colour perception can also vary with lighting conditions.

Paint not drying

Check the ambient temperature; it should be between 15°C and 25°C. Ensure the surface is clean and free from contaminants. Avoid application in high humidity or very cold conditions.

Pros and Cons

Pros

  • Provides an exact colour match for specific Peugeot models and paint codes.
  • Fast-drying formula speeds up the application process.
  • Offers a durable and protective finish for various automotive surfaces.
  • Suitable for use on metal, glass fibre, and rigid plastics.
  • Achieves a professional-looking result with careful application.
  • Compatible with most existing automotive paint finishes.

Cons

  • Requires specific temperature range (15°C-25°C) for optimal application.
  • Best results require application over a primer, adding an extra step.
  • Requires good ventilation or outdoor use, limiting indoor application.
  • Potential for overspray if masking is not done meticulously.
  • Only suitable for specific Peugeot models and years as indicated.

Setup, Compatibility & Care

Preparation:

  1. Ensure the target area is clean, dry, and free from dirt, rust, wax, or oil.
  2. Mask off the surrounding areas meticulously to prevent overspray.
  3. For best results and adhesion, apply a minimum of two coats of Autotek Grey Primer and allow it to dry completely.

Application:

  1. Shake the aerosol can vigorously for approximately 2 minutes before use.
  2. Hold the can 15-25cm away from the surface.
  3. Apply in several thin, even coats, allowing 10-20 minutes drying time between each coat.
  4. After each spray, turn the can upside down and spray for 2-5 seconds to clear the nozzle and prevent blockages.
  5. Allow the paint to become touch dry within 10-20 minutes.
  6. For full curing, let the painted surface rest for 24 hours.

Usage Conditions:

  • Use only outdoors or in a well-ventilated area.
  • Apply within a temperature range of 15°C to 25°C.

Compatibility:

  • Compatible with Peugeot 206, 207, 208, 308, 407, 408, 508, 2008, 3008, 4007, 5008, Partner & RCZ models from 2007 onwards.
  • Compatible with metal, glass fibre, and rigid plastic surfaces.
  • Suitable for cellulose and nearly all automotive paint finishes.

Care:

  • Clean application tools (if any used for masking or support) with a suitable solvent immediately after use.
  • Avoid contact with painted surfaces until fully cured.

Price History

DatePrice
Visit shop