Eaton RJ45 Cat 5e Titanium Bulkhead Interface - M22-RJ45-SA

It is designed for front mounting applications in industrial environments requiring a robust and protected RJ45 network connection, such as on control panels or enclosures.

The IP65 rating indicates that the socket is protected against dust ingress and is resistant to water jets when the cover is closed. This ensures protection in demanding industrial settings.

While the socket is specified as Cat 5e, it may physically accept Cat 6 or Cat 7 cables. However, performance will be limited to Cat 5e standards, and compatibility is not guaranteed.

Yes, the IP65 rating when closed makes it suitable for environments exposed to dust and water jets, common in some outdoor industrial applications, provided it is mounted correctly.

The Eaton M22-RJ45-SA requires a rated voltage of 24V and can handle a rated current of 1.5A. This is typically for powering the interface or associated signaling, not for data transmission itself.

Clean the exterior with a soft, dry or slightly damp cloth. Avoid harsh chemicals or abrasive materials that could damage the titanium bezel or plastic housing.

Specific warranty information should be obtained from the retailer or Eaton directly, as it can vary by region and supplier.

Verify that the Cat 5e cable is securely connected at both ends and to the RJ45 socket. Check that the connected device is powered on and configured correctly. Ensure the socket is receiving the correct rated voltage (24V).

Inspect the network cable for damage. Ensure the cable is rated Cat 5e or higher. Check for any physical obstructions or damage to the RJ45 socket itself. Confirm operating temperature is within range (-25°C to 70°C).

Ensure the protective cover is properly closed when no cable is connected. Check the seal around the mounting area for damage or gaps. Do not operate outside the specified IP ratings (IP65 closed, IP20 connected).