Clarke Double Headed Metal Nibbler DHC-2

The Clarke Double Headed Metal Nibbler DHC-2 can cut steel plate up to a maximum thickness of 1.8mm.

Yes, the tool is capable of cutting stainless steel up to a maximum thickness of 1.2mm.

The DHC-2 can also cut copper/aluminium plate, plastic, and fibreboard up to 2mm thick.

The minimum cutting radius for the Clarke Double Headed Metal Nibbler DHC-2 is 12mm.

It comes supplied with a tool rest, cutter holder, wrench, and a metal storage box.

The tool weighs approximately 0.5 kg, making it lightweight and easy to handle.

The tool operates at speeds between 1500 and 3000rpm.

Check if the material exceeds the maximum cutting capacity. Inspect the cutters for wear or damage and replace if necessary. Ensure the tool is operating at an appropriate speed for the material.

Verify that the cutters are securely tightened. Ensure the tool is not being forced through the material. Check for any foreign debris in the cutting mechanism.

This can be due to dull cutters or attempting to cut material beyond its optimal thickness. Sharpen or replace cutters. Ensure consistent pressure and speed during the cut.

Check the power source. The tool may have overheated; allow it to cool down. If the issue persists, the cutters might be jammed or excessively worn, requiring inspection and potential replacement.