Cablenet Cat6a Patch Lead - 1.5m - Red

LSOH stands for Low Smoke Zero Halogen. Cables with an LSOH jacket are designed to emit minimal smoke and no toxic halogenated compounds when exposed to fire, making them safer for use in enclosed spaces like offices or public buildings.

Cat6a (Category 6a) cables are designed to support higher frequencies and can deliver up to 10 Gbps Ethernet speeds over longer distances (up to 100 meters) compared to Cat6, which typically supports 1 Gbps up to 100 meters, or 10 Gbps over shorter distances (around 37-55 meters).

S/FTP signifies that the cable has a braided screen (S) around all the twisted pairs, and each individual twisted pair is also shielded with foil (FTP). This dual shielding provides superior protection against electromagnetic interference (EMI) and crosstalk.

No, this specific Cablenet patch lead is not designed or rated for outdoor use. Outdoor Ethernet cables require specific weatherproofing and UV resistance.

Check the specifications or documentation for your network device (router, switch, network card). Devices are typically labeled as supporting specific Ethernet standards like 10/100/1000 Mbps (Gigabit) or 10 Gbps.

Stranded conductors are more flexible than solid conductors. This makes the cable easier to route in tight spaces, more resistant to damage from bending and vibration, and generally better suited for patch cords that are frequently moved or handled.

Yes, gold plating offers excellent conductivity and resistance to corrosion. This ensures a stable and reliable connection over time, reducing the risk of signal degradation or connection failure due to oxidation.

Ensure both ends of the cable are securely plugged into their respective ports. Check if the link lights on your network devices are illuminated. Try a different patch cable to rule out a cable fault. Verify network settings on your devices.

Check for physical damage to the cable. Ensure the cable is not excessively bent or kinked. Verify that both connected devices support Cat6a speeds. Test with a different port on your switch or router. Reduce the number of devices on the network or close unnecessary applications.

Confirm that the power source (e.g., PoE switch, injector) supports the required PoE standard (PoE++ for maximum output). Ensure the connected device is compatible with PoE. Check all cable connections for security.

Ensure the snagless boot is not obstructed. Push the RJ45 connector firmly and release the clip properly when unplugging. Check for any debris in the port or on the connector.