Best current price£12.99from Joybuy
Shopping.co.uk recommended and popular offers
Joybuy£12.99Visit shop Creality Purple Hyper Pla 1Kg, High-Speed 30-600Mm/S, Dimensional Accuracy +/-0.02Mm, Compatible With Most Fdm 3D Printers, 1Kg (2.2Lbs) Spool
Visit shop4 offers from £12.99 - £18.98
View price history by clicking the chart icon.
The Creality Hyper 1.75mm PLA is a high-performance filament designed for hobbyists and professionals who prioritize print speed without compromising structural integrity. Its key benefit is the optimized high-fluidity formula that enables printing speeds up to 600mm/s, resulting in consistent, high-quality output for detailed prototypes and artistic models. One caveat to keep in mind is that while it is highly compatible with most FDM printers, its superior results are best achieved when paired with Creality-specific hardware and calibrated settings.
| Model Part Number | 3301010410 |
|---|---|
| Brand | Creality |
Yes, it is a standard 1.75mm PLA filament and will work on any FDM printer that accepts this diameter, though performance results are best on Creality machines.
While it varies by printer, typically high-speed PLA performs best between 200°C and 230°C.
A heated bed is recommended to ensure optimal first-layer adhesion and to minimize warping, though it is not strictly mandatory for all small prints.
Store in a sealed bag with desiccant packets to prevent moisture absorption, which can affect print quality.
The Creality Hyper PLA complies with REACH and RoHS standards for material safety.
PLA is biodegradable and may degrade or deform under direct sunlight and high heat; it is generally recommended for indoor use only.
Ensure the spool is mounted correctly on the holder and that the filament end is never let go without being secured in the spool's edge slots.
Verify that your print temperature is high enough to support the required flow rate or decrease your maximum flow rate in slicer settings.
Increase the print temperature slightly or check that your part cooling fan is not set to 100% too early in the first few layers.
For the best results, store the filament in a cool, dry place and use a dry box if you live in a humid climate, as PLA can absorb moisture over time. When setting up in your slicer, use the recommended temperature range for high-speed PLA to ensure proper melting fluidity. Because it is highly compatible with Creality 3D printers, ensure your printer firmware is updated and your bed is properly leveled. For cleaning, use a soft, dry cloth to wipe dust off the filament before it enters the extruder, and perform regular cold pulls if you transition between different material types.
