Dylon Hand Fabric Dye - Fresh Orange

This dye is most effective on natural fibers such as cotton, linen, viscose, wool, and silk. It is not suitable for synthetic materials like polyester, nylon, or acrylic, or fabrics with special finishes.

One 50-gram pack of Dylon Hand Fabric Dye is designed to color up to 250 grams (approximately 0.55 lbs) of dry fabric to its full shade. For heavier items or to achieve a more intense color, you may need to use multiple packs.

Yes, Dylon Hand Fabric Dye is an excellent choice for craft techniques like tie-dye and batik due to its hand application method, allowing for precise and creative designs.

Yes, it is highly recommended to wash the fabric thoroughly before dyeing. This removes any dirt, stains, or finishes that could prevent the dye from absorbing evenly or correctly.

Always wear rubber gloves when handling the dye and protect your work surfaces with plastic sheeting, old newspapers, or a dedicated dyeing basin to prevent accidental staining.

Ensure your fabric is a natural fiber, as synthetics will not take the color well. Also, check the dry weight of your fabric; if it's over 250 grams per pack, the color will be lighter. Using more dye packs for heavier items will help achieve a richer, more vibrant shade.

After dyeing, rinse the item thoroughly in cold water until the water runs clear. For the first few washes, wash the newly dyed item separately in cold water to prevent any residual dye from transferring to other garments.

Ensure the fabric is a natural fiber and weighed accurately. If the fabric weight exceeds 250g per pack, the color will be lighter. For deeper shades, use additional dye packs. Also, verify that the dye solution was prepared correctly with sufficient salt (if required) and hot water.

Make sure the fabric was thoroughly wet before immersion. Constantly agitate the fabric in the dye bath for the initial 10-20 minutes, and regularly thereafter, to ensure even dye absorption. Ensure the dye bath volume is large enough for the fabric to move freely without being cramped.

Always wear rubber gloves when handling the dye powder and solution. Protect all work surfaces with plastic sheeting, old newspapers, or a large plastic tray. Clean up any spills immediately with a suitable cleaner.

The fabric was not rinsed thoroughly enough after dyeing. Continue rinsing in cold water until the water runs completely clear. For the first few washes, always wash the dyed item separately to prevent color transfer to other laundry. A warm iron might help to further set the dye once dry.

Check if the fabric is a natural fiber. Synthetic fabrics (e.g., polyester, nylon, acrylic) will not absorb this type of dye. Also, ensure the fabric was clean and free of any fabric finishes, which can act as a barrier to dye absorption. Verify that the dye was properly dissolved and applied according to instructions.