Shopping.co.uk

Bartoline Bitumen Paint - Black - 1L

Not AvailableBartoline Bitumen Paint - Black - 1L

Bitcote Black Bitumen Paint is made from carefully selected Bitumens dissolved in special petroleu...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

This guide is for DIY enthusiasts and professionals seeking a robust anti-corrosive coating for iron and steel. Bartoline Bitumen Paint offers excellent rust protection and waterproofing with an easy brush application, providing a durable, glossy finish that turns dull over time. A key consideration is its limited compatibility and the fact that ordinary paints cannot be applied over it.

All features

ColourBlack
Model Part NumberBP7580
BrandBartoline

Extended Product Information

FAQs

What is Bartoline Bitumen Paint best used for?

It is best used for providing an outstanding anti-corrosive and waterproofing solution for iron and steel, such as railings, gates, and structural steel.

How much area can 1 liter cover?

One liter of Bartoline Bitumen Paint is sufficient to cover approximately 10 square meters, depending on the porosity of the surface.

Can I paint over this Bitumen Paint with another type of paint?

No, you cannot apply ordinary paints over Bartoline Bitumen Paint.

What should I do if I need to spray this paint?

If spraying, thin the paint with no more than 10% Bartoline White Spirit.

What conditions should I avoid when using this paint?

Do not use if the surface temperature can rise above 70°C, and do not use on tarmacadam drives or roadways. Avoid application where mineral oils or solvents will come into contact.

How should I prepare metal surfaces before painting?

Metal surfaces should be thoroughly cleaned, dried, and wire brushed to remove all rust. For long-term protection, consider using a rust-inhibitive product first.

How long does it take for the paint to dry?

The paint is typically touch dry in approximately 4-8 hours at normal temperatures.

Troubleshooting

Paint is too thick for application.

Thin slightly with Bartoline White Spirit, following the recommended limits (max 10% for spraying, consult product for brushing recommendations).

Uneven finish or brush marks visible.

Ensure proper surface preparation and apply thin, even coats. Avoid overworking the paint during application.

Poor adhesion to surface.

Verify the surface was clean, dry, and free from rust or grease before application. Ensure a suitable primer was used if required for long-term protection.

Paint not drying within expected timeframe.

Ensure application in suitable temperatures (avoid extremes) and adequate ventilation. Check if excessive coats were applied too thickly.

Pros and Cons

Pros

  • Provides excellent anti-corrosive properties for metal protection.
  • Offers effective waterproofing for treated surfaces.
  • Simple and economical to apply by brush.
  • Good coverage rate of 10 sq meters per liter.
  • Durable finish suitable for various applications.

Cons

  • Ordinary paints cannot be applied over Bitcote.
  • Not suitable for surfaces that can exceed 70°C.
  • Cannot be used where it will come into contact with mineral oils or solvents.
  • Touch dry time can be lengthy (4-8 hours).
  • Gloss finish turns dull over time.

Setup, Compatibility & Care

Preparation is Crucial: Ensure all surfaces are sound, stable, thoroughly clean, and dry before application. For metal surfaces, wire brush to remove all traces of rust. For long-term protection, consider using a rust-inhibitive primer first.

Application: Apply using a brush or spray. A minimum of two coats is recommended. Allow the first coat to dry before applying the second coat at right angles to the first. If spraying, thin with no more than 10% Bartoline White Spirit.

Compatibility:

  • Do NOT apply ordinary paints over Bitcote.
  • Do NOT apply where mineral oils or solvents will come into contact.
  • Do NOT use if the surface temperature can rise above 70°C.
  • Do NOT use on tarmacadam drives or roadways.

Care: Clean application tools immediately after use with Bartoline White Spirit. Store the paint in a cool, dry place, away from direct sunlight.