Lian Li O11D Mini - White

The included riser cable is PCIe Gen3. While it may work with PCIe 4.0 GPUs, performance may be limited. For optimal performance with PCIe 4.0 GPUs, a Gen4 riser cable is recommended.

You will need a Phillips head screwdriver. It's also helpful to have a small container or bag for screws.

No, this mount is designed specifically for the O11D Mini - White case.

It can potentially affect temperatures. Proper airflow and case fan configuration are crucial. Monitor GPU temperatures after installation.

Yes, the riser cable is a separate component and can be replaced if needed. However, ensure the replacement cable is of good quality and the correct generation (Gen3 or Gen4).

Route the riser cable carefully to avoid sharp bends. Ensure it is not obstructing any fans or other components. Use cable ties or Velcro straps to secure the cable for a clean look.

Ensure your GPU is a standard size and fits within the dimensions of the O11D Mini case. Check the vertical mount's specifications to ensure your GPU is compatible with the bracket.

1. Ensure the PCIe riser cable is securely connected to both the GPU and the motherboard. 2. Verify the GPU is seated correctly in the vertical mount. 3. Check the BIOS settings to ensure the PCIe slot is enabled and set to Gen3 mode if necessary. 4. Try updating your motherboard's BIOS.

1. Ensure the PCIe riser cable is properly connected. 2. Verify that the cable is not bent or damaged. 3. Check for any obstructions to airflow around the GPU. 4. Try reseating the GPU in the bracket. 5. Test the GPU with the riser cable removed to determine if the cable is the issue.

Check to ensure the fans are not obstructed by any case components. Ensure the GPU has sufficient space for airflow. If you changed the GPU orientation, confirm it still has sufficient clearance.