LINA BEIGE Self-adhesive Wall Tiles - d-c-fix

It is recommended to apply these tiles only over flat, painted, and smooth surfaces like existing tiles or plastered walls. Wallpaper may not provide a suitable adhesion surface.

No, these tiles are waterproof on the surface but are not designed for constant exposure to water or immersion. They are best suited for splashback areas and not wet zones like shower cubicles.

You can typically peel them off slowly. If there is any residual adhesive, it can usually be removed with a mild solvent or warm, soapy water and a cloth. Test in an inconspicuous area first.

Yes, the collection allows for mixing and matching of different colours and patterns to create a unique design statement or a more subtle blend.

The surface must be clean, dry, smooth, and free from dust, grease, or soap residue. Ensure any existing paint is sound and not peeling.

Clean with a damp cloth. For tougher marks, use a mild detergent and water, then rinse and dry. Avoid abrasive cleaners.

While the surface is waterproof, they are designed for vertical wall applications (splashbacks) and may not withstand the wear and tear or heat from a countertop.

Ensure the surface is completely clean, dry, and free of dust or grease. Re-position the tile and press firmly, paying attention to the edges.

Gently lift the edge of the tile and carefully re-apply, smoothing out the air towards the edge. For small bubbles, a pinprick may release the air.

Ensure the underlying tiles are perfectly flat and smooth. For significant grout line depth, a skim coat of filler might be needed on the wall before application, or consider a tile with a thicker, more opaque design.

Use sharp scissors or a sharp craft knife with a cutting mat for clean cuts. Score the line and then bend to snap for thicker vinyl if needed.