Best current price£7.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.99Visit shop B&Q - 3 Way Satellite Splitter With A Single Input Port And Three Output Ports Arranged On The Splitter Housing
Visit shop1 offer from £7.99
View price history by clicking the chart icon.
The kenable 007458 3-way F-type splitter is an essential tool for homeowners and technicians looking to distribute a single satellite or cable signal to three separate devices, such as satellite receivers or cable modems. It is designed for those who need a reliable, durable solution for multi-room signal distribution without significant loss, though users should be aware that splitting a signal can naturally reduce the individual signal strength reaching each connected device.
| Model Part Number | F282LB |
|---|---|
| Brand | Electrovision |
Yes, the 5-1000 MHz frequency range covers most standard digital cable and satellite signals.
No, it is a passive device. It passes power from the connected receivers to the dish, but does not need its own power supply.
While technically possible, splitters are designed for signal distribution. Using them as combiners may lead to signal reflection and poor performance.
No, the device is designed for indoor use. You should provide a weatherproof enclosure if used outdoors.
The splitter weighs approximately 60 grams.
Ensure all F-type connectors are screwed on tightly. If the problem persists, use a signal amplifier before the splitter to compensate for signal loss.
Check the coaxial cables for damage or kinks. Ensure no moisture has entered the connections, as this can corrode the internal contacts.
Installation is straightforward due to the standard threaded F-type female ports. Simply screw your incoming coaxial cable into the 'In' port and attach your outgoing cables to the three remaining 'Out' ports. This unit is intended for indoor use; if you must install it in a location exposed to the elements, ensure you use self-amalgamating tape or a protective enclosure to prevent moisture from entering the connectors. Periodically check the screw connections to ensure they have not vibrated loose over time, as loose connections are the primary cause of signal degradation.
