Timco Cabin Hooks - Hot Dipped Galvanised - 3"

The hook is made from durable cast iron.

It means the hook has been coated in molten zinc, providing excellent protection against rust and corrosion, suitable for various environments including urban and industrial areas.

Yes, four 4.0 x 30mm countersunk screws are included.

Its primary purpose is to retain doors and gates in an open position, preventing them from closing unintentionally.

Yes, due to its hot-dipped galvanised finish, it is well-suited for exterior use on gates and doors exposed to the elements.

The backplate measures 45mm in length and 45mm in width.

The bar length is 75mm (approximately 3 inches).

Ensure the eyelet is properly aligned and engaged with the hook. Verify that both the hook and eyelet are securely fastened to solid mounting surfaces. Check for any obstructions preventing full engagement.

Ensure you are using a screwdriver bit that matches the countersunk screw head. If mounting into a very hard material, pre-drilling a pilot hole slightly smaller than the screw diameter may be necessary.

While rare with the hot-dipped galvanised finish, minor surface rust can be gently cleaned with a soft brush and mild detergent. For persistent issues, consider a protective coating suitable for galvanized steel.