Briton 376 Single Panic Bolt - Silver

The Briton 376 is fire-tested to EN 1634, achieving a 2-hour fire rating on timber doors and a 4-hour fire rating on metal doors.

The Briton 376 is CE Marked to EN 1125 and UKCA Marked to EN 1125. It is also Certifire Approved (CF5506).

While the installation can be done by a competent person, it's recommended to have it professionally installed to ensure optimal performance and compliance with safety regulations.

It is suitable for single and double rebated and non-rebated doors.

The push bar is made of tubular steel.

Regularly inspect the device for wear and tear, clean it with a damp cloth, and lubricate moving parts to ensure smooth operation. Check and tighten all screws and fixings.

Refer to the product documentation for warranty information.

Check for obstructions around the push bar. Verify that the latch is not damaged or misaligned. Check the bolts, they may be stuck and require lubrication or adjustments.

Adjust the top and bottom shoots. Check for misalignment of the door or frame. Inspect for any obstructions or damage to the latch mechanism.

Lubricate the moving parts of the device. Check for any debris or obstructions that might be causing friction. Ensure correct alignment.

Adjust the shoot bolts to ensure they are extending fully into the frame. Check the door alignment and adjust as needed.

Check all screws and fixings and tighten as required. Examine the mechanism for any loose parts.