Trend Kitchen Fitters Set - 5 Piece
Best current price£207.00from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£207.00Visit shop Trend Cr/Kfp/5 Kitchen Fitters Set, 5 Piece A - Multi Colour
Visit shopThe Range£207.00Visit shop All Offers
4 offers from £207.00 - £251.43
View price history by clicking the chart icon.
The RangeTrend Cr/Kfp/5 Kitchen Fitters Set, 5 Piece A - Multi Colour
£4.99 delivery
£207.00
Visit shop
OnBuy.comTrend Cr/Kfp/5 Kitchen Fitters Set, 5 Piece 5063750522975
Free delivery in 1–3 days
£241.81
Visit shop
Trend Cr/Kfp/5 Kitchen Fitters Set, 5 PieceFree delivery in 1–3 days£241.81Visit shop →
B&QB&Q - Cr/kfp/5 Kitchen Fitters Set5 Piece Multi Colour (One Size)
Free delivery in 1–3 days
£251.43
Visit shop
Product Information
Full details
The Trend CR/KFP/5 Kitchen Fitters Set is designed for professional joiners and experienced DIY enthusiasts who require high-precision routing for kitchen worktop installations. These cutters excel at creating crisp, clean joints in post-formed laminate worktops up to 40mm thick, though they are specifically engineered for heavy-duty chipboard cores, meaning they should be used with appropriate feed rates to maintain edge quality. This 5-piece kit ensures you always have a fresh, sharp cutter on hand for critical hob and sink cut-outs.
All features
| Model Part Number | CR/KFP/5 |
|---|---|
| Brand | Trend |
Extended Product Information
FAQs
Can I use these in a 1/4in router?
No, these cutters feature a 1/2in shank and require a professional router with a 1/2in collet.
Are these cutters suitable for hardwood?
While they will cut hardwood, they are specifically optimized for the abrasive nature of chipboard and laminate worktops.
What is the purpose of the K-Mark?
The K-Mark indicates that the product meets specific safety and quality standards required for professional tool usage.
How thick of a worktop can I cut?
These cutters are designed for worktops up to 40mm thick.
How do I maintain the PTFE coating?
Avoid using harsh metal scrapers or wire brushes on the coating; use a resin-dissolving solvent and a soft cloth.
Troubleshooting
Excessive burning on the cut edge
Reduce your feed rate and ensure you are not lingering in one spot. Check that the cutter is sharp and not clogged with resin.
Vibration during operation
Check that the collet is tightened securely and the shank is properly seated. Verify that the router speed is set correctly for a large diameter bit.
Chipping the laminate surface
Ensure you are using a sharp cutter and maintain a steady, continuous movement. Use a sacrificial backer board if possible to support the exit edge.
Pros and Cons
Pros
- Durable carbide construction resists wear from abrasive laminate
- PTFE coating prevents build-up and heat damage
- Center tip allows for plunge cutting without pre-drilling
- Standardized 1/2in shank fits most professional routers
- K-marked for verified safety and quality
Cons
- Not suitable for use with light-duty 1/4in routers
- Requires proper feed speed to avoid scorching chipboard
- Limited to specific material thicknesses up to 40mm
Setup, Compatibility & Care
Setup: Ensure your router is equipped with a 1/2in collet. When inserting the cutter, ensure the shank is pushed into the collet past the minimum insertion mark but not bottomed out against the collet base, as this can cause stress.
Compatibility: These cutters are compatible with any industrial or professional-grade router accepting 1/2in shank bits. They are optimized for worktops up to 40mm thick.
Care: Clean the cutters regularly with a resin-dissolving cleaner to maintain the efficiency of the PTFE coating. Store them in the provided case or a protective rack to prevent the carbide tips from chipping against other tools.