Bartoline Multi Purpose Filler Powder - 1.5KG - White
Easy to mix and simple to use Bartoline Multi Purpose Filler Powder is a traditional filler ideal ...Easy to mix and simple to use Bartoline Multi Purpose Filler Powder is a traditional filler ideal for preparing surfaces by filling cracks and holes in walls, ceilings, around door frames and skirting boards. It has excellent adhesive properties to keep the filler firmly in position and sets hard enough to take nails or screws. It also provides a smooth white surface for overpainting or wallpapering, which does not shrink, and may be sanded when dry. Suitable for exterior use when it is sealed with an oil-based paint or varnish. Suitable for repairs to plaster, plasterboard, wood, brick, stone and most other building materials. Preparation: For best results brush out loose material and dust from crack or hole to be filled. Hairline cracks should be slightly enlarged to ensure good filler penetration. Moisten absorbent surfaces with water. Touch in nail and screw heads with an oil-based paint to prevent rusting. Mixing: Only mix an amount that can be used within 2-3 hours.
OnBuy.com3 Pcs Bartoline Multi Purpose Powder Filler 450G New Easy To Use Easy To Sand Dries White Suitable For Interior And Exterior Use 5010789713249
B&Q - Multi Purpose Powder Filler Plaster Wood Brick Stone Repair 450GFree delivery in 1–3 days£11.69Visit shop →
B&Q - Multi Purpose Powder Filler Plaster Wood Brick Stone Repair Sack 9KgFree delivery in 1–3 days£17.99Visit shop →
Product Information
Full details
This guide helps users of Bartoline Multi Purpose Filler Powder understand its uses and how to apply it effectively. Ideal for both DIY enthusiasts and professionals, this filler is excellent for preparing surfaces by filling cracks and holes. However, it's crucial to mix only what you can use within a few hours to prevent it from hardening in the container.
All features
Colour
White
Brand
Bartoline
Extended Product Information
FAQs
How long does it take for the filler to dry?
Drying time depends on the depth of the fill and environmental conditions, but generally, it takes a few hours to dry completely.
Can I use this filler on exterior surfaces?
Yes, but it must be sealed with an oil-based paint or varnish.
What surfaces is this filler suitable for?
It is suitable for plaster, plasterboard, wood, brick, stone, and most other building materials.
Can I sand the filler?
Yes, once the filler is dry, you can sand it to create a smooth surface.
How do I clean my tools after use?
Clean tools with water immediately after use.
How should I store the remaining powder?
Store the remaining powder in a cool, dry place and ensure the container is sealed to prevent moisture absorption.
Troubleshooting
Filler is too thick or difficult to spread.
Add a small amount of water and mix thoroughly until you reach the desired consistency.
Filler is cracking after drying.
Ensure the filler is applied in thin layers, allowing each layer to dry completely before applying the next. For deep holes, apply in multiple stages.
Filler not adhering to the surface.
Ensure the surface is clean and free of dust or loose particles. Moisten absorbent surfaces before applying.
Pros and Cons
Pros
Easy to mix and apply.
Suitable for a wide range of building materials.
Provides a smooth, paintable surface.
Durable and long-lasting when used correctly.
Cons
Requires proper sealing for exterior use.
Must be mixed in small batches due to quick setting time.
May require multiple applications for deep holes or cracks.
Setup, Compatibility & Care
Preparation: Clean the surface to be filled. Remove any loose material and dust.
Mixing: Mix only the amount of filler you can use within 2-3 hours. Follow the instructions on the packaging for the correct water-to-powder ratio.
Application: Apply the filler to the crack or hole using a filling knife. Ensure it's level with the surrounding surface.
Drying: Allow the filler to dry completely before sanding or painting. Drying time may vary depending on the depth of the fill and environmental conditions.
Sanding: Once dry, sand the filled area to achieve a smooth finish. Use fine-grit sandpaper.
Painting/Decorating: Apply paint or wallpaper once the filler is completely dry and sanded. If used outdoors, use an oil-based paint or varnish to seal it.
My Motor World£4.39Visit shop 
Amazon£4.49Visit shop 
eBay£22.99Visit shop 
