Solvent Weld Waste Pipe - 40mm x 3mtr White

Use SC250 solvent cement for the best results.

Allow 12 hours for the solvent weld joints to cure before testing for leaks.

This pipe is generally suitable for standard household hot water temperatures. However, always consult the manufacturer's guidelines for specific temperature limits.

The pipe is resistant to many common household chemicals. However, it is advisable to avoid prolonged exposure to strong solvents or corrosive substances.

Use a suitable pipe cutter or a fine-toothed saw to ensure a clean, square cut.

Solvent weld joints are permanent. If you need to make changes, you will need to cut the pipe and use new fittings.

You can find more information on the FloPlast website or consult a qualified plumber for assistance.

Ensure proper application of solvent cement and that the pipe is fully inserted into the fitting. Allow sufficient curing time (12 hours).

Make sure both surfaces are clean and that you are using the correct solvent cement. Apply a generous amount to both surfaces.

Check for any obstructions, such as debris or foreign objects. Use a plumbing snake to clear the blockage.