Solar Panel Kit - 30W - Polycrystalline - LOWENERGIE
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This LOWENERGIE 30W Polycrystalline Solar Panel Kit is designed for individuals and small off-grid applications seeking a reliable solar charging solution. Its key benefit is providing a consistent power source for batteries, ideal for RVs, boats, sheds, or remote cabins, with a caveat that it's best suited for maintaining charge rather than powering high-demand devices. The kit includes a 30W polycrystalline solar panel, a PWM solar charge controller, a 1-meter panel cable, 2-meter battery connection cables with crocodile clips, and mounting brackets for straightforward installation.
All features
| Brand | Lowenergie |
|---|
Extended Product Information
FAQs
What type of battery can I use with this kit?
This kit is designed for 12V lead-acid batteries, including AGM, Gel, and Flooded types. It is not suitable for Lithium-ion batteries without additional specific controllers.
Can this kit power a refrigerator?
No, the 30W output is too low to power a refrigerator. This kit is primarily intended for maintaining battery charge or powering very low-demand devices.
How much power does this panel generate per day?
Under optimal sunny conditions, the 30W panel can generate approximately 150-180 Watt-hours per day. Actual output will vary based on sunlight intensity, angle, and weather.
Do I need an inverter with this kit?
This kit itself does not include an inverter. If you need to power AC devices (like household appliances), you would need to purchase a separate inverter and ensure your battery capacity and solar input are sufficient.
What is the warranty period for this product?
Please refer to the manufacturer's documentation or the retailer's product page for specific warranty information, as it can vary.
How do I determine the correct angle for the solar panel?
For optimal year-round performance, angle the panel towards the equator (South in the Northern Hemisphere, North in the Southern Hemisphere) at an angle roughly equal to your latitude. Adjustments can be made seasonally for peak performance.
Troubleshooting
Panel not producing power
Ensure the panel is clean and free of obstructions. Check all cable connections are secure and correctly polarized. Verify the charge controller is functioning and indicating sunlight input. Test the panel's voltage output directly with a multimeter if possible.
Battery not charging
Confirm the battery voltage is within the charge controller's operational range. Check the polarity of the battery connections. Ensure the charge controller is not showing an error code for over-discharge or over-voltage.
Charge controller not powering on
Verify the battery is connected and has sufficient charge. Check the fuse on the charge controller if applicable. Ensure the battery polarity is correct.
Intermittent charging
Check for shading on the solar panel throughout the day. Ensure the panel is angled correctly towards the sun. Clean the panel surface. Inspect cable connections for any intermittent faults.
Pros and Cons
Pros
- Provides a sustainable power source for battery charging.
- Includes all necessary components for a basic setup.
- Charge controller offers battery protection.
- Mounting brackets facilitate easier installation.
- Suitable for small-scale off-grid power needs.
Cons
- 30W output may be insufficient for high-power consumption devices.
- Polycrystalline panels are generally less efficient than monocrystalline panels in direct sunlight.
- PWM controller is less sophisticated than MPPT controllers for optimal charging in variable conditions.
- Cable lengths might be limiting for certain installations.
- Primarily for battery maintenance/trickle charging.
Setup, Compatibility & Care
Setup:
- Mount the solar panel securely using the provided brackets, ensuring it faces the sun for maximum exposure.
- Connect the 1M solar panel cable to the panel.
- Connect the other end of the panel cable to the 'PV' or 'Solar' input terminals on the PWM charge controller.
- Connect the 2M battery cable with crocodile clips to the 'Battery' terminals on the charge controller.
- Attach the crocodile clips to the corresponding positive (+) and negative (-) terminals of your 12V battery.
- Ensure all connections are secure and correctly polarized.
Compatibility:
- Designed for 12V battery systems.
- Compatible with lead-acid batteries (AGM, Gel, Flooded).
Care:
- Keep the solar panel clean. Gently wipe the surface with a damp cloth to remove dust, dirt, or bird droppings. Avoid abrasive cleaners.
- Regularly inspect connections for corrosion or looseness.
- Ensure the charge controller is kept in a dry, ventilated location.