Valspar Trade - Pink

This primer is specifically designed to seal chalky and weathered surfaces, such as weathered wood and previously painted surfaces.

Drying times will vary, but it typically dries quickly. Check the product label for specific dry times under different conditions.

This primer is not specifically designed for metal surfaces. It is best to use a primer specifically designed for metal.

This primer is compatible with most water-based and oil-based topcoats. Always check the topcoat manufacturer's instructions for specific recommendations.

Clean tools immediately after use with soap and water.

It is best to apply this primer when the temperature is between 50°F (10°C) and 90°F (32°C). Avoid applying in direct sunlight or on hot surfaces.

Coverage will vary depending on the surface and application method. The product label will provide estimated coverage rates. Plan to buy enough for two coats, especially on chalky surfaces.

Ensure proper ventilation and check the temperature and humidity levels. High humidity or low temperatures can slow drying times. Make sure you haven't applied the primer too thickly.

Ensure the surface was properly prepared before priming. Remove loose paint, sand the surface, and clean any dirt. Also, make sure that the primer is compatible with the surface and topcoat you're using.

Apply a second coat of the topcoat. Ensure the primer has completely dried before applying the topcoat.