Best current price£17.12from Amazon
Shopping.co.uk recommended and popular offers
Amazon£17.12Visit shop Dremel Accessory 9936 Tungsten Carbide Cutter Wheel - 19 mm Structured Cutting Bit for Rotary Multi Tool
Visit shop6 offers from £17.12 - £23.95
View price history by clicking the chart icon.
The Dremel 9936 Structured Tooth Tungsten Carbide Cutter is designed for DIY enthusiasts and professionals who need to perform aggressive material removal for carving and engraving tasks. Its key benefit is the fast cutting action from sharp tungsten carbide teeth, allowing for efficient work on a variety of materials. A potential caveat is its specialized nature, meaning it might be overkill for delicate or very soft materials where less aggressive bits are preferred.
| Model Part Number | 2615993632 |
|---|---|
| Brand | Dremel |
The Dremel 9936 has a maximum recommended RPM of 35,000.
It can be used on fiberglass, wood, plastic, epoxy, rubber, laminates, particle board, soft metals, and ceramic tile.
The shank diameter is 3.2mm (1/8 inch).
While it can engrave, its aggressive cutting action is best suited for material removal and shaping. For very fine detail, a smaller or less aggressive bit might be more appropriate.
After use, clean the cutter with a stiff brush to remove debris. Ensure it is dry before storing.
The working diameter is 19mm (approximately 0.75 inches).
Yes, it is suitable for use on soft metals.
Ensure the rotary tool is running at a sufficient speed (close to 35,000 RPM). Check if the material being cut is compatible. Inspect the cutter teeth for excessive wear or buildup; clean or replace if necessary.
Verify that the bit is securely tightened in the collet. Ensure the shank is clean and free of debris. Check if the bit is bent or damaged; replace if necessary.
Reduce the pressure applied to the workpiece. Take frequent breaks to allow the bit and tool to cool down. Ensure the rotary tool is adequately ventilated.
Setup:
Compatibility:
Care:
