Best current price£27.09from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£27.09Visit shop Q.max Sheet Metal Punch, Imperial 5063750442990
Visit shop
B&Q£29.15Visit shop - Q.max Sheet Metal PunchImperial Multi Colour (1 1/8In)
Visit shop2 offers from £27.09 - £29.15
View price history by clicking the chart icon.
The Q.Max 1 1/8 Inch Sheet Metal Punch is an essential tool for electricians, metalworkers, and DIY enthusiasts who need to create precise, clean holes in sheet metal up to 16 gauge. It offers the primary benefit of producing burr-free cuts that require no additional finishing, saving significant time during installation. However, users should be aware that the necessary operating key is not included in the box and must be purchased separately.
| Brand | Q.Max |
|---|
This tool is rated for sheet metal up to 16 gauge. While it can handle many alloys, stainless steel is significantly harder and may reduce the lifespan of the cutting edges.
The punch utilizes a specific geometry that shears the metal cleanly against the die, which prevents the jagged edges typically caused by drill bits or hole saws.
You need a standard drill bit large enough to allow the hexagonal screw to pass through the material comfortably.
No, the punch is supplied boxed singly without the key. The key must be ordered as a separate item.
The Q.Max Sheet Metal Punch is designed for use on materials up to 16 gauge (approximately 1.5mm) in thickness.
Ensure the hexagonal screw threads are clean and lubricated with a light machine oil.
Verify that you are not exceeding the 16 gauge thickness limit and ensure the die is seated perfectly flush against the sheet metal surface.
Check the cutting edges for debris or signs of dulling; if the edges are damaged, the tool may require professional sharpening or replacement.
To set up the punch, first drill a pilot hole in your sheet metal large enough to accommodate the hexagonal screw. Thread the screw through the die and your pilot hole, then align the punch components on either side of the metal. Use the compatible Q.Max operating key to tighten the screw; as the screw turns, the punch will be pulled through the metal.
For care and maintenance, always keep the cutting edges free of debris and store the tool in a dry environment. While the black finish is anti-corrosive, applying a light coat of machine oil to the threads after each use will ensure smooth operation and prevent the screw from seizing.
