Wavin OsmaSoil S/S branch 90 degree 110mm Black

The keyway is a unique design feature that ensures the correct fall (gradient) is achieved when a boss socket adaptor is installed, promoting efficient waste flow and preventing potential blockages.

The ring-seal sockets incorporate captive seal technology. This means the rubber seal is held securely in place, preventing it from dislodging during installation and ensuring a watertight, leak-proof connection.

Yes, while it features push-fit ring-seal sockets, the Wavin OsmaSoil system is also designed for solvent weld applications where appropriate, requiring Wavin PVC-U cleaner and solvent cement for a permanent bond.

The Wavin OsmaSoil system is Kitemarked to BS EN 1329-1:2000, ensuring it meets rigorous British and European standards for soil and waste discharge pipes.

This Wavin OsmaSoil S/S branch fitting has a diameter of 110mm, which is a standard size for soil and waste applications.

For routine cleaning, a damp cloth is generally sufficient. Avoid using abrasive cleaners. For blockages, use appropriate drain clearing methods suitable for PVC-U pipework.

Ensure the pipe end is fully inserted into the socket and the captive seal is correctly seated. Re-seat the pipe if necessary. Check the seal for damage.

The joint was likely not prepared or executed correctly. The pipe section will need to be cut out and re-joined using the proper cleaning and cementing procedure. Ensure surfaces are clean and dry before applying cement.

Ensure pipe ends are cut square and free from burrs. If using solvent weld, ensure the cleaner and cement have been applied correctly and the appropriate setting time is observed before applying full pressure.

Check for blockages within the pipework or at the connection points. Ensure the correct fall has been achieved using the keyway feature where applicable.