Fiddes Nitro Floor Stain - Brown
Best current price£108.97from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£108.97Visit shop B&Q - FiddesNitro Floor Stain5 LitreLight Honey
Visit shopB&Q£108.97Visit shop One Offer
1 offer from £108.97
View price history by clicking the chart icon.
Product Information
Full details
This guide is for DIY enthusiasts and professional woodworkers looking to achieve a rich, deep color on wooden floors before applying a protective finish. The Fiddes Nitro Floor Stain in Brown offers a penetrating oil-based solution that enhances wood grain, providing an ideal base for Hard Wax Oil. A key consideration is the need for meticulous surface preparation and immediate excess removal to ensure an even finish.
All features
| Colour | Brown |
|---|---|
| Model Part Number | NFSLH5 |
| Brand | Fiddes |
Extended Product Information
FAQs
What is the coverage rate of Fiddes Nitro Floor Stain?
The coverage is approximately 14 square meters per liter, but this can vary depending on the porosity of the substrate and the method of application.
Can I apply Fiddes Nitro Floor Stain over a previous finish?
No, this stain is designed for bare wooden floors. Previous finishes must be completely removed through sanding before application.
How many coats of Fiddes Nitro Floor Stain should I apply?
For the initial application, one coat is recommended to achieve the base color. Additional coats can be applied to deepen the color, but they will only enhance the existing shade rather than adding new layers of color.
What is the drying time between coats?
There is no need to sand between coats. The stain dries in 6-8 hours at room temperature. If applying a second coat to deepen color, allow adequate drying time for the first coat before proceeding.
What top coat is recommended after using this stain?
Fiddes Nitro Floor Stain is ideal for use before applying Fiddes Hard Wax Oil. Other compatible wood finishes may also be suitable, but always test compatibility first.
How should I prepare my floor before applying the stain?
The floor must be sanded in stages to a fine grit (180-220), ensuring all dust and blemishes are removed. Always sand in the direction of the wood grain and wipe away all sanding dust before application.
Can I use this stain on furniture or other wood surfaces?
While formulated for floors, its penetrating oil-based nature means it can be used on other interior wood surfaces, provided they are properly prepared and sanded.
Troubleshooting
Uneven color patches after application.
This is usually due to excess stain not being removed quickly enough. Ensure you wipe away all excess immediately after application in the direction of the grain. For future applications, apply thinner coats and work in smaller sections if necessary.
Stain not penetrating the wood effectively.
Verify that the wood surface has been adequately sanded with the recommended grit (180-220) and is completely free of dust, oils, or existing finishes. Ensure the product has been stirred thoroughly.
Wood appears too dark after the first coat.
The stain deepens with additional coats. If the first coat is darker than desired, avoid applying a second coat. Ensure you applied a thin, even coat initially and removed excess promptly.
The stain is not drying within the specified time.
Ensure application is in a well-ventilated area with appropriate room temperature (ideally around 15-25°C). Thick application or high humidity can prolong drying times. Check that no incompatible products were mixed or applied before the stain.
Pros and Cons
Pros
- Provides a deep, rich color to wooden floors.
- Enhances the natural wood grain.
- Acts as an excellent base coat for subsequent finishes like Hard Wax Oil.
- Allows for color depth adjustment with additional coats.
- Formulated for professional and DIY floor finishing projects.
Cons
- Requires thorough surface preparation (sanding and dust removal).
- Immediate removal of excess stain is critical for an even finish.
- Drying time of 6-8 hours per coat can extend project duration.
- Only one coat is recommended for the initial application, with subsequent coats used solely for deepening color.
Setup, Compatibility & Care Instructions
Preparation is Key:
- Sand the wooden floor in stages, starting with a medium grit (120) and progressing to a medium-fine grit (180-220).
- Ensure sanding is done in the direction of the wood grain wherever possible.
- Thoroughly remove all sanding dust and any glue residue.
- Test the stain on a spare piece of wood or an inconspicuous area to confirm the desired color.
Application:
- Stir the Fiddes Nitro Floor Stain well before use.
- Check the shade before application.
- Apply a thin, even coat using a clean, lint-free cotton cloth or sponge, working in the direction of the wood grain.
- Immediately wipe away any excess stain with a separate, clean absorbent cloth, again following the grain pattern.
- For a uniform color, blend the stain across the entire surface with consistent pressure.
- Allow the stain to dry completely. Do not sand between coats.
- A second coat can be applied if a deeper color is desired, but it will only deepen the existing shade.
Drying Time:
- Allow 6-8 hours for drying at room temperature.
Compatibility:
- This stain is specifically formulated for application onto wooden flooring.
- It is ideal for use before applying Fiddes Hard Wax Oil or other compatible wood finishes.
Care:
- Once the final top coat is applied and cured, clean the floor with a dry or slightly damp cloth. Avoid excessive moisture.