Stiga CS100e Cordless Chainsaw Kit - 20V

Refer to the user manual. Generally, you'll loop the chain around the bar, ensuring the cutting teeth face the correct direction, and then secure the bar assembly to the chainsaw body.

Sharpen the chain when it becomes difficult to cut, or the saw produces fine sawdust instead of wood chips. This depends on usage.

Use bar and chain oil specifically designed for chainsaws.

Use the quick tensioning system on the side of the chainsaw, following the instructions in the manual. The chain should be tight enough to not sag but loose enough to be easily moved by hand.

Use only the 20V 4Ah battery provided with the Stiga CS 100e chainsaw kit or a compatible Stiga battery.

Charging time can vary. Refer to the charger's instructions for specific charging times, but it typically takes a few hours.

Replacement chains are available at most hardware stores or online retailers that sell Stiga products. Ensure you purchase the correct size for the 25cm/10" bar.

Ensure the battery is fully charged and properly connected. Check the on/off switch.

Tighten the chain using the quick tensioning system, following the instructions in the manual.

Check the chain for sharpness and correct orientation. Sharpen or replace the chain as needed.

Ensure the battery is fully charged before use. Consider using the chainsaw in shorter bursts to conserve battery life.