Polypipe 110mm Soil 135deg Equal Branch Double Socket Black - ST404B

This fitting is used in residential drainage systems to create a 135° equal branch connection between two 110mm soil pipes, allowing for waste to be channeled efficiently.

No, the push-fit ring seal design allows for quick and easy installation without the need for specialized tools or adhesives.

It means the branch connection comes off the main pipe at a 135-degree angle, and both the main pipe and the branch pipe are of equal diameter (110mm in this case).

Yes, the durable PVC construction makes it suitable for use within residential drainage systems, including underground applications, provided it is installed correctly according to plumbing standards.

PolySoil® is Polypipe's system of soil and ventilation pipes and fittings, designed for integrated and reliable drainage solutions in domestic properties.

Ensure the pipe ends and the inside of the socket (including the ring seal) are clean and lubricated with a silicone-based lubricant. Push the pipe firmly and squarely into the socket until fully seated.

While it uses a standard 110mm diameter, it is specifically designed for the Polypipe PolySoil® system. It is recommended to use it with other Polypipe components for guaranteed compatibility and performance.

Ensure the pipe was fully inserted into the socket and that the ring seal is correctly seated and undamaged. Check for obstructions within the socket or on the pipe end. Re-lubricate and re-seat the connection.

Verify that both the pipe end and the socket are clean and free from debris. Use an appropriate silicone-based lubricant on the pipe end and the socket's ring seal. Ensure the pipe is being pushed in squarely.

Inspect the fitting for any cracks or deformities before installation. If damage is found, do not use the fitting and replace it with a new one.