Kenable Network Ethernet Cable - Cat5e

Cat5e (Category 5e) is a standard for Ethernet cables that supports data transfer rates up to 1000 Mbps (Gigabit Ethernet). It is an improved version of the older Cat5 standard.

CCA stands for Copper Clad Aluminium. It uses an aluminium core with a thin copper coating. This makes the cable lighter and cheaper to produce compared to pure copper cables, but it can slightly reduce signal quality and is not recommended for PoE.

No, this cable is not recommended for PoE applications. CCA cables have higher resistance than pure copper cables, which can lead to overheating and is not suitable for carrying electrical power.

Once connected, your device's network interface should show a link status light (usually an LED near the port). Most operating systems will also indicate a network connection is active.

The maximum standard length for a Cat5e Ethernet cable to reliably support Gigabit speeds is 100 meters (approximately 328 feet).

The 0.5m length is ideal for short, direct connections to reduce clutter. If your devices are far apart, you will need a longer cable.

Moulded plugs have the cable jacket directly over the connector body, providing strain relief and preventing the cable from bending too sharply at the connection point, which enhances durability compared to un-moulded connectors.

Ensure both ends of the cable are securely plugged into the correct ports. Try a different Ethernet port on your router or switch. Test with another known working cable to isolate the issue.

Check if the cable is damaged or kinked. Ensure the cable is fully seated in the ports. Verify that your internet service plan and router can support higher speeds. For very demanding uses, consider a higher-grade cable (e.g., Cat6 or Cat6a).

Inspect the cable for physical damage. Ensure the cable is not routed near strong sources of electromagnetic interference (e.g., large power supplies, microwave ovens). Try a shorter or different cable.