Tulip One Step Tie Dye Kit - Vibrant 3-Color

No, the Tulip One-Step dyes are formulated to activate without a soda ash presoak. Simply add water to the dye bottles.

This kit works best with 100% natural fiber fabrics like cotton, rayon, and wool for the most vibrant and lasting results.

The kit contains enough supplies to create up to 9 projects. The actual number of projects may vary depending on the size of the garment and the amount of dye used.

No, the dyes included in the kit are non-toxic.

Refer to the included inspiration guide for specific setting times, as they can vary based on the tie-dye technique used and fabric type. Typically, allowing the dye to set for several hours or overnight yields good results.

The dyes are designed to be colorfast and remain bright and bold through repeated washings.

Leftover dye mixed with water should be used within 24-48 hours for best results, as the dye solution can degrade over time. Store unused, unmixed dye bottles in a cool, dry place.

Ensure you are using 100% natural fiber fabrics. Confirm that water was added correctly to the dye bottles and they were shaken well. Check that the fabric was not over-rinsed before the initial wash.

Make sure the fabric was adequately saturated with dye and that the dye was applied to all desired areas. Ensure the fabric was not too dry when dye was applied.

Ensure the fabric was tied tightly and securely to prevent dye from reaching all areas. Loosen ties slightly before applying dye to allow for better penetration.

Rinse dyed items thoroughly after the initial dyeing process until water runs clear. Wash dyed items separately for the first few washes.