Magnusson 102mm Masonry Brick Bolster
Best current price£14.38from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£14.38Visit shop B&Q - 102mm Masonry Brick Bolster
Visit shopB&Q£14.38Visit shop One Offer
1 offer from £14.38
View price history by clicking the chart icon.
Product Information
Full details
The Magnusson 102mm Masonry Brick Bolster is designed for masons and DIYers needing to accurately cut or shape bricks and masonry. Its key benefit is the forged hardened steel construction, ensuring durability and effective energy transfer for clean strikes. A potential caveat is its specific use for masonry, requiring supplementary tools for other cutting tasks.
All features
| Brand | Magnusson |
|---|
Extended Product Information
FAQs
What is a brick bolster used for?
A brick bolster is used to score and break bricks or masonry to size, or to shape them for specific fits or aesthetic purposes.
What material is the Magnusson brick bolster made from?
It is forged from hardened steel for strength and durability.
Do I need to sharpen the brick bolster?
For breaking and rough shaping, sharpening is usually not required. The hardened edge is designed to withstand repeated impact. If precise fine cuts are needed and performance degrades, professional sharpening might be considered, but typically it's used as-is.
What kind of hammer should I use with this bolster?
A masons' hammer or a medium-weight ball-peen hammer is typically suitable. The key is to deliver a controlled, firm strike.
Can this tool be used on concrete blocks?
While primarily designed for bricks, it may be effective on softer concrete blocks, but results can vary depending on the block's density and aggregate.
How should I maintain the brick bolster?
Keep it clean and dry after use to prevent rust. Store it safely to protect the striking edge.
Troubleshooting
Bolster not making a clean cut
Ensure the bolster is positioned correctly on the brick and that the strike is firm and accurate. Check if the brick's material is excessively hard for the bolster or if the bolster edge needs dressing (though this is uncommon for typical use).
Damage to the strike face or edge
Inspect for significant chips or deformation. Minor wear is normal, but substantial damage may require replacement of the tool for safety and effectiveness.
Difficulty transferring energy
Verify that you are using an appropriately weighted hammer or mallet and striking the center of the bolster's strike face squarely.
Pros and Cons
Pros
- Exceptional durability due to hardened steel construction.
- Effective energy transfer for clean and precise cuts.
- Designed to withstand rigorous use on construction sites.
- Reliable performance for shaping and cutting masonry.
Cons
- Primarily designed for masonry, not suitable for other materials.
- Requires a hammer or mallet for operation.
- Can produce dust and debris, necessitating protective measures.
Setup, Compatibility & Care
Setup: No setup is required. The Magnusson brick bolster is a hand tool ready for immediate use.
Compatibility: This tool is designed specifically for use with masonry bricks and similar stone materials. It is compatible with standard masons' hammers or mallets for striking.
Care:
- Cleaning: After each use, wipe the bolster clean of dust and debris with a dry cloth. For stubborn residue, a slightly damp cloth can be used, followed by thorough drying.
- Storage: Store the bolster in a dry environment to prevent rust. Ensure the striking edge is protected if stored loosely with other tools.
- Inspection: Periodically inspect the strike face and cutting edge for any signs of excessive wear or damage. Sharpening may be required over time for optimal performance, though typically it is used as-is for breaking rather than fine cutting.