Best current price£18.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£18.99Visit shop K&B Panels 3D Wall Panels, Rustic Brick Effect Styrofoam Wall Panelling Kit, Lightweight, Easy to Install, Dual Insulation to Reduce Acoustic Noise, Indoor & Outdoor (Rustic Sandstone) (1 Panel)
Visit shop3 offers from £18.99 - £20.99
View price history by clicking the chart icon.
The K&B Panels 3D Wall Panels are designed for homeowners and DIY enthusiasts looking to quickly and affordably update interior or exterior walls with realistic textures. Their key benefit is an easy, tool-free installation that transforms spaces within hours, offering excellent aesthetic appeal and insulation. A potential caveat is the need for proper surface preparation and adhesive selection to ensure long-term durability, especially for outdoor applications.
| Model Part Number | KB-TAS-607 |
|---|---|
| Brand | KnB |
Each pack contains 10 panels, each measuring 100 x 50cm, providing a total coverage of 5 square meters (approximately 53.8 square feet).
Yes, the panels can be painted over with most types of paint to customize their color and finish.
The panels are moisture-resistant due to their acrylic coating. For direct water exposure, such as in a shower enclosure, additional sealing is recommended. For outdoor use, a weather-resistant varnish is essential to prevent damage from the elements.
You should use a low-expansion foam adhesive specifically designed for use with EPS, XPS, PIR, or phenolic insulation boards. Always check the adhesive manufacturer's recommendations for compatibility.
While the panels can conceal minor imperfections, significant unevenness may affect adhesion and the final appearance. It is best to have a relatively smooth surface for optimal results. Minor unevenness can sometimes be compensated with careful adhesive application.
Cleaning is simple. Use a soft, damp cloth to wipe down the surface. Avoid using harsh chemicals or abrasive scrubbing pads, as these can damage the textured finish.
The panels offer good durability for decorative purposes. While they can withstand normal indoor use, they are not designed for impact resistance against sharp objects or heavy abrasion. Consider their placement in areas prone to physical impact.
Ensure the wall surface is properly prepared (clean, dry, and smooth). Use the correct type of low-expansion foam adhesive recommended for EPS panels and the specific wall material. Apply adhesive evenly and press panels firmly.
Carefully align panels during installation. If gaps are present after installation, they can sometimes be filled with a paintable filler or caulk that matches the panel color. Ensure precise cutting for a snug fit.
This indicates insufficient protection. Ensure a high-quality weather-resistant varnish was applied to the entire panel surface after installation and that it is reapplied periodically as needed based on environmental exposure.
Use a very sharp utility knife or a fine-toothed saw. Make multiple shallow passes rather than one deep cut for cleaner edges. Consider using a straight edge as a guide.
Setup:
Compatibility:
Care:
