Expansion Joint Filler Foam Roll - 10mm x 100mm x 10M - B&Q

It is used to fill expansion and movement joints in brickwork and blockwork, allowing for material expansion and contraction without causing damage.

It is specifically designed for use with clay fired brickwork, calcium silicate brickwork, and blockwork.

It is available in widths of 100mm, 150mm, and 200mm, and thicknesses of 10mm and 12mm.

Clean the joint, measure the width, select the correct size, and insert the roll, using the tear-off strip for a neat finish. Cut to length if needed.

Yes, it is suitable for outdoor applications, but protect it from prolonged direct sunlight.

The foam roll itself does not typically require cleaning, however, ensure the joint is clear of debris before installation.

No, it is a single-use product.

VAT invoices are available upon request.

Trim the foam roll to the correct width using a sharp knife.

Ensure the joint is clean and free of debris before installation. Use construction adhesive if necessary.

Use a blunt tool to gently push the foam roll into the joint. Ensure the joint is wide enough for the chosen product.