Best current price£9.99from Total Fishing Tackle
Shopping.co.uk recommended and popular offers
Total Fishing Tackle£9.99Visit shop Ngt - Brolly Spike - For Securing Umbrella’s In The Ground
Visit shop
eBay£12.95Visit shop NGT Umbrella Spike For Carp Fishing Umbrella Brolly Screw In Ground Spike
Visit shop3 offers from £9.99 - £12.95
View price history by clicking the chart icon.
The NGT Brolly Spike is designed for anglers and outdoor enthusiasts who require a stable, wind-resistant anchor for their fishing umbrellas or brollies. Its primary benefit is the combination of a spiraled ground-driving mechanism and a secure clamp system, which keeps equipment upright in soft or difficult terrain. While highly effective, users should note that the spike's performance is optimized for natural ground surfaces and may not be suitable for rocky, paved, or extremely hardened ground where the spiral threading cannot penetrate.
| Colour | Silver |
|---|---|
| Model Part Number | FBB-BROLLYSPIKE-476 |
| Brand | NGT |
It is designed to fit the vast majority of standard fishing umbrella and brolly poles due to its adjustable clamping system.
No, the NGT Brolly Spike is designed specifically for soft earth or mud surfaces.
Yes, the turning key bar is a separate piece that slides through the spike head for leverage, making it easy to remove for storage.
Aluminum is naturally resistant to corrosion, but it is recommended to clean and dry the unit after use in muddy water to maintain its longevity.
You should drive the spike until the bottom section of the clamping tube is flush with the ground level for maximum stability.
The ground may be too hard or rocky. Do not force the spike with a hammer, as this may damage the aluminum; instead, move to a softer area or pre-drill a small starter hole.
Tighten the thumb screws firmly. If the pole still slips, ensure the pole is pushed all the way to the base of the holder and check that no dirt is obstructing the grip.
To set up the spike, clear any surface debris from your chosen location. Insert the turning key bar into the provided hole at the top of the spike and rotate clockwise to drive the threads into the ground. Ensure the spike is vertical before the final turns. To maintain the unit, rinse off mud or grit from the threads after every use to prevent buildup. Periodically check the thumb screws to ensure they are free from corrosion and that the threads are not stripped. If you are using an umbrella with an unusually thin pole, consider using a shim or tape to ensure a snug fit within the clamp.
Garden Claw Cultivator Weeding Tool - JHM ButtFrom £11
Spectre Advanced Multi-Purpose Screw 5.0 x 90mm - Forgefix - YellowFrom £5
Spax Construction Screws - SilverFrom £61
Easyfix Hex Flange Carbon Steel Concrete Screwbolt - 10x120mm Pack of 10From £11
Korum Specimen Net Combo - 36ins - 1.8m-2.4mFrom £37
Plastic Headed Nails - 50mm - GreyFrom £22
Diall Fine Metal & Wood Plasterboard Screw - BlackFrom £12
Timco C2 Strong-Fix Double Countersunk PZ3 Screws - Yellow - 6 x 100mmFrom £9
Plastic Headed Nails - 65mm - GreyFrom £22
Diall Fine Metal & Wood Plasterboard Screw - BlackFrom £11
Neilsen Bricklaying Clamp - T-Type, 175mmFrom £10
Erbauer Round Masonry Drill Bit - Dia 6mm - L 100mmFrom £4