Best current price£18.77from Amazon
Shopping.co.uk recommended and popular offers
Amazon£18.77Visit shop Dfm Tool Works Blue Rectangle Card Scraper - Precision Cabinet Multi-Use Scraper For Woodworking, Wood Fine Finishers, Glue Scraper, Quality Handcrafted Card Shaping Tool - Made In Usa, 2 Quantity
Visit shop1 offer from £18.77
View price history by clicking the chart icon.
The DFM Tool Works 2 Piece Cabinet Scraper set is designed for woodworkers seeking precision and durability for tasks like shaping, cleaning, and smoothing wood. Its key benefit lies in the high carbon steel edge that holds its sharpness and the meticulously filed edges for easier sharpening. A potential caveat for new users might be the learning curve associated with achieving the perfect burr for optimal scraping performance.
| Model Part Number | B079BJRH4X |
|---|---|
| Brand | DFM Tool Works |
Cabinet scrapers are used for fine-tuning surfaces, removing marks, shaping wood, and smoothing surfaces, often leaving a cleaner finish than sandpaper, especially on difficult woods.
These scrapers are designed to be 'sharpened' by creating a burr along the edge using a burnisher tool. Periodically, the flat edge may need to be re-sharpened with a file or stone, followed by burnishing.
They work effectively on a wide range of woods, from softwoods to dense hardwoods. Their advantage is most pronounced on figured or difficult-to-work woods where sandpaper might cause tear-out.
Yes, a burnisher tool is essential for creating the hooked 'burr' on the edge, which is what actually does the scraping. Without a proper burr, the scraper will not perform effectively.
The pre-filed edges mean they are ready to be burnished right out of the package, saving you time and effort in preparing them for initial use.
With proper care and regular re-burnishing, the high carbon steel edge is designed for longevity, resisting dulling even when working with tough materials.
While they can remove material, they are best suited for fine smoothing, shaping, and cleaning tasks rather than heavy stock removal. For aggressive removal, other tools like planes or rasps are typically used.
Ensure a sharp burr has been properly created along the edge using a burnishing tool. Check if the burr is worn or damaged and requires re-burnishing.
The burr may be too aggressive or not properly formed. Try adjusting the angle of the burnisher or the amount of pressure applied. Ensure the scraper is held at a consistent angle to the wood.
The material might be harder than expected, or the scraping technique is too aggressive. Ensure proper burnishing technique and consider if a different tool might be better suited for extremely hard materials.
Wipe the scraper completely dry after each use and store it in a dry environment. A light coating of oil can help prevent rust during long-term storage.
Setup:
Compatibility:
Care:
