Godox DP1000III V LED Studio Light
Best current price£397.00from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£397.00Visit shop Godox DP1000IIIV 1000Ws Studio Strobe Flash Light Unit 30W LED Modelling Lamp
Visit shopeBay£397.00Visit shop One Offer
1 offer from £397.00
View price history by clicking the chart icon.
eBayGodox DP1000IIIV 1000Ws Studio Strobe Flash Light Unit 30W LED Modelling Lamp
Free delivery in 1–3 days
£397.00
Visit shop
Product Information
Full details
The Godox DP1000III V is a powerful and versatile 1000Ws studio strobe designed for photographers seeking high-performance lighting. Its key benefit lies in its super-fast flash durations and quick recycling times, making it ideal for capturing motion and maintaining a rapid shooting pace. A potential caveat is its raw power, which may be excessive for very small spaces or specific low-light scenarios without careful management.
All features
| Brand | Godox |
|---|
Extended Product Information
FAQs
What is the maximum power output of the Godox DP1000III V?
The Godox DP1000III V has a maximum power output of 1000Ws.
What is the range of the flash duration?
The flash duration ranges from 1/800s to 1/2000s.
How is the power adjusted on this strobe?
Power can be adjusted from 1/1 to 1/64th power in 1/10-stop increments.
Is the modelling lamp LED or Halogen?
The Godox DP1000III V features a 30W LED modelling lamp.
Can I use this strobe with battery power?
No, the DP1000III V requires a mains power connection and is not battery-operable.
What kind of wireless triggering system does it support?
It supports Godox's Wireless ID system, compatible with X-series triggers like the X1, X2, XPro, and X3.
Does it have a ready beep?
Yes, it features a programmable ready beep that sounds when the unit is ready for its next flash.
What is the benefit of the Wireless ID feature?
The Wireless ID allows you to assign specific IDs to your lights and triggers, ensuring only your setup fires and reducing interference from other photographers using similar equipment.
Troubleshooting
Flash unit does not fire.
Check if the unit is powered on and plugged in. Ensure the Wireless ID settings on the flash and trigger match. Verify the sync cable (if used) is securely connected or that the wireless receiver is functioning. Test with a different trigger or flash to isolate the issue.
Flash recycles slowly.
Ensure the flash is not set to its maximum power (1/1), as this increases recycle time. Check if the power outlet provides sufficient voltage. Avoid continuous high-power firing for extended periods, which can lead to thermal management delays.
Modelling lamp is not working.
Confirm the modelling lamp is enabled in the flash settings. Check the modeling lamp power setting (Off, proportional, percentage). If the LED lamp itself is faulty, contact customer support.
Inconsistent power output.
Ensure the flash is not overheating. Allow it to cool down if necessary. Check that the power dial is functioning correctly and not obstructed. Recalibrate settings if possible through the menu.
Wireless ID is not triggering correctly.
Double-check that the specific Wireless ID (channel and group) is set identically on both the flash and the trigger. Ensure there are no significant physical obstructions between the trigger and the flash. Try resetting both the trigger and the flash to default settings.
Pros and Cons
Pros
- Excellent for freezing fast action due to short flash durations.
- Rapid recycling times allow for a fluid shooting experience.
- Precise power adjustment in small increments offers fine-tuned control.
- The LED modelling lamp is cooler and safer for modifiers.
- Wireless ID system prevents misfires in crowded shooting locations.
Cons
- 1000Ws may be overkill for small spaces or minimal lighting needs.
- Requires a power source; not battery-operable for on-the-go shooting.
- Can be heavy and requires sturdy light stands.
Setup, Compatibility & Care
Setup:
- Mount the Godox DP1000III V securely onto a sturdy light stand using its robust mounting bracket.
- Attach your desired light modifier (softbox, umbrella, reflector) to the S-type mount.
- Connect the power cord to the flash and a reliable power outlet.
- Power on the unit using the power switch.
Compatibility:
This strobe is compatible with Godox X-series wireless triggers (X1, X2, XPro, X3) for remote power control and triggering. It uses a standard Bowens-mount for light modifiers, ensuring compatibility with a wide range of accessories from Godox and other brands.
Care:
- Keep the flash tube and modelling lamp clean; dust can affect light output. Use a soft, dry microfiber cloth.
- Avoid prolonged use of the modelling lamp at high power, especially in enclosed modifiers, to prevent excessive heat buildup, though the LED is much cooler than older halogen models.
- Store the unit in a padded case when not in use to protect it from dust and physical damage.
- Ensure proper ventilation around the unit during operation.