Prym Adhesive Leather Tape - 12mm

No, this is a strong adhesive tape designed for temporary holding during the crafting or alteration process. It is not intended as a permanent seam solution.

While it is listed as suitable for fabric, it is specifically formulated for leather and similar materials. Performance on delicate or loosely woven fabrics may vary and could leave residue.

The adhesive is designed to hold pieces together during construction or alteration. It is intended to be removed once permanent fastening (like stitching) is completed, or if adjustments are needed. It is not meant for long-term adhesion on its own.

Gently peel the tape back slowly at a low angle. If any residue remains, use a leather cleaner or a mild adhesive remover tested on a hidden area first.

The tape is 12 mm wide and comes on a 5-meter roll.

It is best used on the inside or where it will be hidden, as it is designed to be invisible *within* a seam or fold. Applying it externally may affect the leather's surface appearance.

Ensure both leather surfaces are clean, dry, and free from dust, oils, or finishes. Re-apply pressure firmly to the taped area.

Ensure the tape is applied flat without wrinkles or bubbles. Trim excess tape carefully before pressing the second layer of leather.

Gently peel the tape back at a low angle. If residue remains, try using a leather cleaner or a specialized adhesive remover, testing in an inconspicuous area first.

This tape is designed to be removable, but test on a scrap piece of leather first. Clean any minor residue with a damp cloth or appropriate leather cleaner.