Best current price£0.84from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£0.84Visit shop WAGO 250-204 4 Pole 3.5mm 8A 45° Push Button PCB Terminal Block Grey
Visit shop1 offer from £0.84
View price history by clicking the chart icon.
This WAGO PCB Terminal Block is designed for engineers and technicians needing efficient and space-saving wiring solutions on printed circuit boards. Its key benefit is the 45° entry angle and Push-in Cage Clamp® termination, allowing for quick and secure connections in tight spaces. A potential caveat is its specific 3.5mm pitch, requiring compatibility with matching PCB layouts. This 4-pole, 4-potential block offers an 8A current rating and is ideal for compact electronic assemblies.
| Model Part Number | 250-204 |
|---|---|
| Brand | WAGO |
The WAGO 250-204 terminal block has a maximum current rating of 8A.
It is compatible with solid and stranded wires. For stranded wires, using ferrules is recommended for optimal performance and security.
The 45° entry angle allows wires to be inserted and connected from the side, which is beneficial for space-constrained applications where vertical access is limited.
WAGO Push-in Cage Clamp® terminals typically do not require a special tool for wire release. Gently wiggle the wire while pulling it out, or use a small flathead screwdriver or a WAGO release tool in the designated slot if available on the specific model.
The dimensions are height 16.7mm, width 15.5mm, and depth 12mm.
While designed for general power and signal distribution, its primary specifications focus on current rating and mechanical connection. For very high-frequency applications, signal integrity considerations specific to your frequency range should be evaluated.
Based on the provided information, this specific model (250-204) is grey. Other WAGO terminal blocks may be available in different colors.
Ensure the wire is stripped to the correct length and inserted fully into the terminal. Verify the wire gauge is within the specified range. For stranded wire, ensure a ferrule is used if recommended.
Confirm the PCB layout matches the 3.5mm pitch. Check for any obstructions or damage to the terminal block's pins or the PCB's mounting holes.
Verify the current draw does not exceed the 8A rating. Check all connections for proper seating and ensure adequate wire gauge is used. Consider heat dissipation in the surrounding enclosure.
Setup:
Compatibility:
Care:
